Tonybeemer Posted April 10, 2019 Share Posted April 10, 2019 Hi every one, I've just purchased a new Texecom Ricochet 64 Way. Set up the system 3 PIR and 1 door contact no problem apart from I realised that when setting up the config it turns of the zones on the hard wired panel so I re instated them in the config/programme menu as I wanted to add two additional hard wired PIR and looped out the other two. But unless these zones are set as not used I get tamper showing? Any Ideas please? Thanks. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/ Share on other sites More sharing options...
james.wilson Posted April 10, 2019 Share Posted April 10, 2019 Did you link out with cable or the relevant resistor? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-483766 Share on other sites More sharing options...
Tonybeemer Posted April 10, 2019 Author Share Posted April 10, 2019 High James. Normally the Veritas panels come with a little bag of resistor but on this occasion not. So I just linked out with cable is this my problem? Thanks. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-483767 Share on other sites More sharing options...
james.wilson Posted April 10, 2019 Share Posted April 10, 2019 Don't know the panel you may be able to program them as double pole securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-483768 Share on other sites More sharing options...
Tonybeemer Posted April 10, 2019 Author Share Posted April 10, 2019 Hi James, possible. Just a bit strange as I've seen someone on YouTube having the same problem but for them it was a easy fix as they were using all wireless PIR so just set the wired on board zones to not in use? Thanks. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-483769 Share on other sites More sharing options...
sixwheeledbeast Posted April 10, 2019 Share Posted April 10, 2019 Don't link them out, program them out. You should get resistors with the kits and they are DEOL default normally. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-483778 Share on other sites More sharing options...
Specialist Posted April 11, 2019 Share Posted April 11, 2019 Welcome. Speak to your supplier about the missing parts, they should hopefully give you replacements. Customers Love us, Intruders Hate us. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-483792 Share on other sites More sharing options...
al-yeti Posted April 11, 2019 Share Posted April 11, 2019 18 hours ago, Tonybeemer said: Hi every one, I've just purchased a new Texecom Ricochet 64 Way. Set up the system 3 PIR and 1 door contact no problem apart from I realised that when setting up the config it turns of the zones on the hard wired panel so I re instated them in the config/programme menu as I wanted to add two additional hard wired PIR and looped out the other two. But unless these zones are set as not used I get tamper showing? Any Ideas please? Thanks. Where you panel? eBay? amazon? Think they have returns policy if bits were missing , maybe it was used panel , although resistors are cheap and programming them out is easier Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-483797 Share on other sites More sharing options...
Tonybeemer Posted June 3, 2019 Author Share Posted June 3, 2019 Hi every one, I've just purchased a new Texecom Ricochet 64 Way. Set up the system 3 PIR and 1 door contact no problem apart from I realised that when setting up the config it turns of the zones on the hard wired panel so I re instated them in the config/programme menu as I wanted to add two additional hard wired PIR and looped out the other two. But unless these zones are set as not used I get tamper showing? Any Ideas please? Thanks. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-484772 Share on other sites More sharing options...
Specialist Posted June 3, 2019 Share Posted June 3, 2019 Hi: Isn't this the exact same question you asked on April 10th ? 1 Customers Love us, Intruders Hate us. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42836-texecom-elite-64w/#findComment-484773 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now