Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Texecom Elite 64w

Tonybeemer
in Guest Forum

Featured Replies

Hi every one, I've just purchased a new Texecom Ricochet 64 Way. Set up the system 3 PIR and 1 door contact no problem apart from I realised that when setting up the config it turns of the zones on the hard wired panel so I re instated them in the config/programme menu as I wanted to add two additional hard wired PIR  and looped out the other two. But unless these zones are set as not used I get tamper showing? Any Ideas please? Thanks. 

Did you link out with cable or the relevant resistor? 

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

  • Author

High James. Normally the Veritas panels come with a little bag of resistor but on this occasion not. So I just linked out with cable is this my problem?

 

Thanks.

Don't know the panel you may be able to program them as double pole

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

  • Author

Hi James, possible. Just a bit strange as I've seen someone on YouTube having the same problem but for them it was  a easy fix as they were using all wireless PIR so just set the wired on board zones to not in use?

 

Thanks.

Don't link them out, program them out.

You should get resistors with the kits and they are DEOL default normally.

Welcome.

Speak to your supplier about the missing parts, they should hopefully give you replacements.

Customers Love us, Intruders Hate us.
18 hours ago, Tonybeemer said:

Hi every one, I've just purchased a new Texecom Ricochet 64 Way. Set up the system 3 PIR and 1 door contact no problem apart from I realised that when setting up the config it turns of the zones on the hard wired panel so I re instated them in the config/programme menu as I wanted to add two additional hard wired PIR  and looped out the other two. But unless these zones are set as not used I get tamper showing? Any Ideas please? Thanks. 

Where you panel?

 

eBay?

amazon?

 

Think they have returns policy if bits were missing , maybe it was used panel , although resistors are cheap and programming them out is easier 

 

  • 1 month later...
  • Author

Hi every one, I've just purchased a new Texecom Ricochet 64 Way. Set up the system 3 PIR and 1 door contact no problem apart from I realised that when setting up the config it turns of the zones on the hard wired panel so I re instated them in the config/programme menu as I wanted to add two additional hard wired PIR  and looped out the other two. But unless these zones are set as not used I get tamper showing? Any Ideas please? Thanks. 

Hi: Isn't this the exact same question you asked on April 10th ?

Customers Love us, Intruders Hate us.

    •
    • Upvote 1

    Create an account or sign in to comment
    Go to topic listing

    Recently Browsing 0

    • No registered users viewing this page.

    Important Information

    By using this site, you agree to our Terms of Use.

    I accept

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.