MrHappy Posted January 23, 2018 Share Posted January 23, 2018 35 minutes ago, CARETAKER46 said: is my Panel overloaded, I never had any problems with the panel or Alarm since 2004/5 yes, it also looks like it was wired in the dark by blindman Quote Mr Veritas God Link to comment Share on other sites More sharing options...
james.wilson Posted January 23, 2018 Share Posted January 23, 2018 if its proper monitored comms yes you would be notified of a line cut. Doubt the risk warrants g4 comms but trying to avoid you feeling a false sense of security. id never use a dialler for anything Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
CARETAKER46 Posted January 23, 2018 Author Share Posted January 23, 2018 Thanks James . soot meaning is there a burnt mark, getting me worried now. What is wrong with the wiring , so I can rectify. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted January 24, 2018 Share Posted January 24, 2018 2 hours ago, CARETAKER46 said: Thanks James . soot meaning is there a burnt mark, getting me worried now. What is wrong with the wiring , so I can rectify. Just tidy it up a bit Quote Link to comment Share on other sites More sharing options...
CARETAKER46 Posted January 24, 2018 Author Share Posted January 24, 2018 Thanks Al Yeti for the confirmation now my mind can rest in piece. Quote Link to comment Share on other sites More sharing options...
Imnotshankled Posted October 3, 2022 Share Posted October 3, 2022 (edited) On 23/01/2018 at 22:05, CARETAKER46 said: Thanks James . soot meaning is there a burnt mark, getting me worried now. What is wrong with the wiring , so I can rectify. It's a common problem with all texecom veritas panels with the voltage regulator it doesn't even have to be overloaded for it to get very hot I never seen one that has not had this problem its just the design flaw all of these have Just make sure to replace the battery and check the charger Edited October 3, 2022 by Imnotshankled Quote Link to comment Share on other sites More sharing options...
CARETAKER46 Posted October 4, 2022 Author Share Posted October 4, 2022 On 03/10/2022 at 17:56, Imnotshankled said: It's a common problem with all texecom veritas panels with the voltage regulator it doesn't even have to be overloaded for it to get very hot I never seen one that has not had this problem its just the design flaw all of these have Just make sure to replace the battery and check the charger Thanks i usually change the battery when it can not hold it any longer when the power cuts happen. Which Charger i need to check ? Quote Link to comment Share on other sites More sharing options...
Imnotshankled Posted October 4, 2022 Share Posted October 4, 2022 7 minutes ago, CARETAKER46 said: Thanks i usually change the battery when it can not hold it any longer when the power cuts happen. Which Charger i need to check ? Make sure you get around 13.6 volts on the battery leads Quote Link to comment Share on other sites More sharing options...
CARETAKER46 Posted October 4, 2022 Author Share Posted October 4, 2022 5 minutes ago, Imnotshankled said: Make sure you get around 13.6 volts on the battery leads Thanks. so i need to have 13.6 volts reading on the battery. Is this without connecting to the panel ? Quote Link to comment Share on other sites More sharing options...
james.wilson Posted October 4, 2022 Share Posted October 4, 2022 no it needs to be coming out of the panel so meter the leads with the battery disconnected. Waiting till the battery has totally failed will usually kill the panel Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.