@Galaxy Guyy

@al-yeti

Okay after tomorrow I will reconnect the sensor to the panel as galaxy guy recommended and I will share pictures with you coz I finished my work for today and tomorrow is my weekend , thx for your support.

10 hours ago, Moataz said:

 

 

welcome back OX!

3 hours ago, al-yeti said:

Dude what you on about 

 

He's got the role jumpers still in and using resistors , unless I confused , but if not you need to start again 

 

Instructions far to messy

 

I hadn't seen the jumpers when I seen this on my phone - sorry.  They are wrong anyway. The second jumper block is set to pins 5+6 and should be 1+2. 

 

When using the built-in EOL resistors:

At the panel:

+12v to brown.

0v at the zone to blue.

The zone input to green.  

 

At the sensor, connect:

Brown  to +12v

Blue to 0v.  Now loop a wire from 0v in the sensor and connect it to NC.

Connect the green wire to T2.

 

The instructions are in English and made sense to me.

 

 

needs a jumper on J19 as term 8 is current set to not used

 

Needs minimum a 6 core

 

but wiring in cat 5  

1 hour ago, Nova-Security said:

needs a jumper on J19 as term 8 is current set to not used

 

Needs minimum a 6 core

 

but wiring in cat 5  

Intruder alarms not a big thing in middle east (as you can imagine......) Hence working with what your given