Euro 46 control panel question

[Mark Rider]

Hi a question, with the euro 46 control panel having 8 inputs/zones that's 8 sensors. Right ? 

 So when i add the LCD panel to the control panel I can add another input direct to the lcd panel. So have 9 inputs/zone total is that right ? 

 One other question 

Magnetic contacts would you run more than 1 on each input/zone ie a window with 2 openings.  And have the contacts in series. ? 

 Thanks very much 

 

Mark

 

[sixwheeledbeast]

One device (sensor) per zone is best practice, it makes it easier to locate any faults in the future.

 

[Litch90]

32 minutes ago, sixwheeledbeast said:

One device (sensor) per zone is best practice, it makes it easier to locate any faults in the future.

 

Agree six wheel, nothing worse than 10 door contacts on one zone....Maybe 11 contacts..

[al-yeti]

7 minutes ago, Litch90 said:

Agree six wheel, nothing worse than 10 door contacts on one zone....Maybe 11 contacts..

Although you asked about one window with two openings 

[Mark Rider]

I did think 1 per zone. But having only 8 inputs will have more sensors than that with 2 PIRs and about 10 or 11 door/window contacts . 

 Has anyone fitted the pyronix euro 46 ? 

 As looks like I can have 1 if not 2 inputs of the LCD panel 

 

 

Thanks 

 

Mark

[petrolhead]

2 inputs on each keypad, and for more inputs just fit a zem

[Mark Rider]

Great thanks 

Just to confirm 

 4 wires to contact 2 tamper and 2 power. And run eol on each contact ? 

 Mark

[petrolhead]

Nope

[Mark Rider]

Oh ok. What do you say then.? 

 

[james.wilson]

I would put a zem in