49 minutes ago, datadiffusion said:

With the zone splits, wasn't there a 'B' terminal in Abacus brand PIRs for a 2nd circuit (but shared tamper??), or couldn't you use a splitter box? And wasn't the split thing just glorified EOL using unpublished values?

 

Just wondering if that, as well as a ropey contact/connection could be an issue...

You had to use a zone splitter to split zones, its programmed as a final exit on part set, so when part set it should start up the entry timer before going into alarm, if you part set the alarm.

Was all weird setup lol

Have a couple of things to look at in the short term then.

 

In the long term think it's Abacus RIP time and will replace with a modern unit but will start anew topic on that.

 

Thanks for your replies.

1 hour ago, Griffmaster said:

Have a couple of things to look at in the short term then.

 

In the long term think it's Abacus RIP time and will replace with a modern unit but will start anew topic on that.

 

Thanks for your replies.

Although abacus RIP won't necessarily solve your problem......

10 hours ago, al-yeti said:

Although abacus RIP won't necessarily solve your problem......

QFA the Ab is a good panel, and the fault is not the panel 

it was but its an oap now

3 minutes ago, james.wilson said:

it was but its an oap now

I still have a fair few out there going strong

do you have anything (apart from you) older in your house or work?

He meant you...

9 minutes ago, PeterJames said:

I still have a fair few out there going strong

 

13 minutes ago, james.wilson said:

it was but its an oap now

 

hmpphhh just because I like to be green! Why keep filling land fill up with working stuff