cos2010 Posted April 30, 2017 Share Posted April 30, 2017 Hi All I'm after some advice, a customer has a alarm on there workshop which is about 60 meters away from the main building. there is no link between the workshop alarm and the main building alarm but they want the workshop alarm monitoring via the emizon module in the main building. The issue I have is it is not possible to run a cable from the workshop to the main building so i was looking for some way to setup a wireless link where i can wire the workshop alarm into a transmitter which would trigger a relay in the main building. Has anyone seen or have a link to a device that would do this? Thanks Dan. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/ Share on other sites More sharing options...
PeterJames Posted April 30, 2017 Share Posted April 30, 2017 Scantronic TX and RX would work Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462447 Share on other sites More sharing options...
norman Posted April 30, 2017 Share Posted April 30, 2017 (edited) Are they still available ? Edited April 30, 2017 by norman Nothing is foolproof to a sufficiently talented fool. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462454 Share on other sites More sharing options...
petrolhead Posted April 30, 2017 Share Posted April 30, 2017 Pyronix mc2 for a tx, ur2-we for an rx Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462455 Share on other sites More sharing options...
PeterJames Posted April 30, 2017 Share Posted April 30, 2017 2 hours ago, norman said: Are they still available ? Yes, we installed three receivers and a transmitter a couple of months ago, and Eaton gave our engineer support on them too 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462456 Share on other sites More sharing options...
datadiffusion Posted April 30, 2017 Share Posted April 30, 2017 (edited) 2 hours ago, norman said: Are they still available ? Yes, as per PJ, the 762r 2 channel 'universal' (all faults, batt etc... indicated via relays) with very handy options for a range of external antennae via BNC socket for extra range inc. 1/4 (locally mounted) and 1/2 wave (external grade via a flying lead), as well as the PCB one on board. Now comes in Eaton branded boxes so very much a current product - for better or worse. Edited April 30, 2017 by datadiffusion So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462460 Share on other sites More sharing options...
james.wilson Posted April 30, 2017 Share Posted April 30, 2017 are we still recommending 1 way rf? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462464 Share on other sites More sharing options...
datadiffusion Posted May 1, 2017 Share Posted May 1, 2017 When used to essentially connect legacy equipment, I don't see as much of an issue. So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462465 Share on other sites More sharing options...
PeterJames Posted May 1, 2017 Share Posted May 1, 2017 13 hours ago, james.wilson said: are we still recommending 1 way rf? There is nothing two way that would do it.... is there? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462466 Share on other sites More sharing options...
datadiffusion Posted May 1, 2017 Share Posted May 1, 2017 Yes, Texe now have a standalone Rx module for Ricochet So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41196-wireless-alarm-signal/#findComment-462470 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now