sixwheeledbeast Posted December 22, 2016 Share Posted December 22, 2016 You shouldn't break neutrals for anything! I imagine using a relay from a programmed output to trigger the emergency stop input? Why not a lockable isolator? 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455481 Share on other sites More sharing options...
Mattmasters Posted December 22, 2016 Author Share Posted December 22, 2016 they dont want to have anything to do with the shutter side.. all they want to do is turn the alarm on and know the door is isolated... i was going to use a relay to break the common live that goes to the remote.. the remote has three wires.. Common live, up and down..... either the common live or the up... maybe the up... that way it can still come down... hmmm... so many options.. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455482 Share on other sites More sharing options...
al-yeti Posted December 22, 2016 Share Posted December 22, 2016 40 minutes ago, whistle said: 10 amp relay, diode? Open close output i would stick to house bashing. He is lol Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455483 Share on other sites More sharing options...
al-yeti Posted December 22, 2016 Share Posted December 22, 2016 3 minutes ago, Mattmasters said: they dont want to have anything to do with the shutter side.. all they want to do is turn the alarm on and know the door is isolated... i was going to use a relay to break the common live that goes to the remote.. the remote has three wires.. Common live, up and down..... either the common live or the up... maybe the up... that way it can still come down... hmmm... so many options.. You will also have to think about faults , with a fault he can't open the door at all, so you will still need some kind of override feature ,with the obvious secondary door access or manual shutter pull and so on Basically possible to do with other problems to go with it Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455485 Share on other sites More sharing options...
Mattmasters Posted December 22, 2016 Author Share Posted December 22, 2016 the fault bypass i was going to use was a tampered keyswitch.. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455486 Share on other sites More sharing options...
al-yeti Posted December 22, 2016 Share Posted December 22, 2016 1 minute ago, Mattmasters said: the fault bypass i was going to use was a tampered keyswitch.. Could I electrocute it and blow the panel and box and coms in one go? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455488 Share on other sites More sharing options...
datadiffusion Posted December 22, 2016 Share Posted December 22, 2016 (edited) That'll teach any burglars a lesson they won't forget... With the added bonus you can catch up with URN paperwork back at the station. Edited December 22, 2016 by datadiffusion So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455491 Share on other sites More sharing options...
Mattmasters Posted December 22, 2016 Author Share Posted December 22, 2016 if you want too im sure you could yes.. the door controller is only 24v but hey.. if you hold on to a near by 230v socket with wet hands u may do!! Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455492 Share on other sites More sharing options...
datadiffusion Posted December 22, 2016 Share Posted December 22, 2016 # underneath the arches # So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455493 Share on other sites More sharing options...
al-yeti Posted December 22, 2016 Share Posted December 22, 2016 We need some good old 4mm Link to comment https://www.thesecurityinstaller.co.uk/community/topic/40753-roller-shutter-doors-via-rela/page/3/#findComment-455496 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now