al-yeti

If you can avoid the app do so , it's messy , the selfmon virtual keypad might do them if they want to set from bed lol

Ok Your insurance is currently void with no maintainer btw

Yes , risk is DIY and how confident you are and when a fault develops that you can't deal with Also how much insurance discount did you get for having the alarm ,? £100? Or no discount at all ?

As swb Or like you say wait for stuff to come up on eBay, By the way ADT haven't fleeced you at all , you need to think about why I say that , I don't work for them or have any connection with them , your not saying much others don't say about other companies aswell. You want to save money per month which is fine , but things cost money for companies they can't pay for everything Anyhow back on track , eBay is your only way

Easier to hand twist and lash in close nice white cover

You have fitted some alarms with someone yet?

You blagging? Cos I professional blagger and only room for.ome here

Honeywell change so much? Be serious what I mean ?

What does your company install? And can you train there ?

Yes you could get a cheap version repeater or booster which can take a cable but from what I seen they still don't work well so you could just get another router with onboard WiFi and connect that with maybe a small amount of changes in settings This is cheap way of doing it As swb said access point, but decent ones cost money

You could do that yes , it's cheap way of doing it , better than a cheap booster or repeater

Verisure are giving away equipment to get there connections , lying out of there teeth about being approved around here , but as it's cheap people take it

Opening chicken shop and it was there already

Maybe it was connected to a dialler or GSM device? And it's telling you it can't send a signal out ? Just guessing , did you change your broadband phone supplier and it disconnected your alarm from the line , it maybe your installer connected the line even if you didn't get reports No idea otherwise

Best to get something GSM with cheap monthly SMS SIM not payasgo

They just work centre , very well not ally on the 9651

You want to part set not set areas and zones there is way to do that to Setting zones and areas is different to part sets Then because some areas are seperate you can disarm what you want , nothing will be perfect but he should be able to do it

You can if the panel has enough groups But realistically what your asking for is no offence kind of stupid for residential, say you have 25 zones , your not in reality going to set them individually , except if you group them or as you said put them in areas What is more likely, if available , you need a bigger panel with more zones that will give you more areas Wallet is needed , he probably knows all this already if he's got you this far unless he's a diyer

Yeah do it man If you can help it leave cables where possible, maybe can use them in future

More or less yes If there's a bellbox outside it may die quickly , or ring for 20 mins Worst case ladder hammer

On this panel the external bell shouldn't sound when you take the cover off But you can disconnect the internal speaker if codes are no good

You mean short your leads make sure your meter goes zero , and it's unlikely to be near zero if long runs but low reading I would break the block if it's not working anyway , identify each tamper , test each one and then locate problem But as said above upgrade panel or get rid of internet.....

Not my expertise But wouldn't it silence otherwise? System will be in fault , you can always active something to find out

Lol I read that different

Better to replace panel, as if your competent as you say you are, it will be allot less hassle , and you won't go in circles