al-yeti
-
Posts
9,164 -
Joined
-
Last visited
-
Days Won
117
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by al-yeti
-
-
Is texecom app free for end user ?
-
Is it a galant?
Yes that's the one a galant
-
Yes there's a few of these about Vista keypad ademco panel
-
-
I wish ! No I never got to go and have a look at any of it, much to my disappointment.
Yeah but everyone thinks your great eh?
-
I wish I was paid in the first place dealing with you skally wags
12core?
-
Lol, not that it worries me!
-
I think the mods are great especially Peter James I think he is such a wonderful person always helpful and understanding, I think he deserves a pay rise James
-
Yeah they are just installers not engineers haha
Hi
- 1
-
Yeah but you ever get the angle wrong? Kept going?
-
Keypad.....
Always unsets clear? Checked detail log? When they go missing maybe common link somewhere
-
Don't know geezer but problem hasn't surfaced since fixing the cable (New cable)
I didn't diss the neg? I put it back on
-
Well if you remember I had this issue with a 520 , a line dropping some modules , and only thing I found was the neg problem since then been a while the problem hasn't surfaced
-
Is it an adt firmware
-
Honeywell documents the ground going through, so that's all coblers?
-
How have you powered from panel to power Rios ie what does ground do and what does the positive do
-
Nah man £100 if it don't work due to these errors, they won't call you again , or they will give you the job because kit is new and sealed , or you will turn up and its second hand kit or part new and part old
What we need is quals!
-
SIM how much you charge if equipment doesn't work and have to leave it, what you charge then?
-
Laptop or handheld device carried by all these days
Software which can be run on a smartphone would be handy
-
I always use metre drill bit for bell cable, up a ladder, obviously you have to stand a rung or 2 down but i reckon its piss easy.
What drill?
-
What?????Red fast flash is i believe Anti-mask condition, basically the microwave has detected movement when the PIR section hasnt. Usually happens when you have the microwave range is set too far and it ends up seeing into the next room or something(which the pir cant do)
That's anti mask?????
You mean red flashing fast could be the sensor is showing masking , which isn't what you described
Fast flash is trouble problem with masking or fault with the Pir and so on
Did you just buy this ? You may have damaged it or its faulty
-
that's why I asked, to work out if you were going to connect a speaker to correct terminals or the sound bomb
You can do allot of damage
-
For me I tend to do mostly domestics, average zones 11. If possible I like to have a panel that can do upto 16 wired zones with the facility to add wireless.
Pet hate is coming across a panel that has a completely impossible programming tree to follow.
For me I'm finding Risco lightsys2 to fit that hate.
Sounds like you need to look at hkc , 70zones wired data, wireless on board , 10zones available standard
-
.
The soffits hang over about about 2 courses already so that's going to be a long hole to drill. But it's gotta be done so all or the advice.
Have some Polyfila a ready for the room inside if you get it wrong
Overhang doesn't matter, above suggested your drilling in the wall one course down 45angle , depends on how your house is made up , some have the inner wall in the way and you have to feel quite far down where the cable is , just shove loads of cable in from outside and if you don't have rods use a metal coat hanger as a hook to poke in from inside the roof to the eaves to find cable
New Siren
in !!..DIY Installers..!!
Posted
What's the Pgm doing when in engineers mode?
And what happens when you manually do the eng hold at the bell