al-yeti
-
Posts
9,155 -
Joined
-
Last visited
-
Days Won
117
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by al-yeti
-
-
Have you tried a different arc ?
-
Which c&g?
-
No offence geezer, but in any case it's standard kit at standard price to sell
Cameras won't last outside away from the sofits from what I have seen
Price is cheap personaly don't do much cctv but I would charge double lol
-
Ah I reckon it's Labour included , as from what I seen cheapest dvr and eyeballs used , they all look the same to me, £20 an eyeball job
-
What model? Few companies using word advanced
-
That price is non hd around here and 80% profit
-
Cool
All about him not waking up the Mrs when he's coming home late every night!!!!
Hope he has an internal siren though
-
I must have missed where we assume it's an old keypad and not a g2
-
If you crashed it then you may have to check your programming
Maybe you selected zone split by mistake
-
You must have changed a setting , turned on zone splitting in error?
-
First state model geezer before you try the above
-
What model alarm and keypad ?most have buzzers soldered on , so no not as simple as it at seem
-
My company is looking for an experienced security engineer.
Good understanding of intruder alarms, IPcctv and networking is essential
Knowledge of fire and access control would be beneficial.
Company based in Handforth, Wilmslow. Covers 50mile radius.
Leave replies on this post or PM.
Thanks,
-Luke
You leaving? I remember you asked about doing stuff on the side geezer
-
So basically just another type of spectrum analyser
-
Worse case install power line?
-
So new frequency coming? What will you tell you customers? "Your stuffed"?
-
Yes three minute window, can't remember portal version though
-
On Honeywell gear yes, hkc no
-
We just go into housing and building like you , get bigger cone cutters and your done
Is csl overall cheapest?
-
If it's general info
Ie phone number email address being registered company anyway
What's the big deal it's all available anyway ?
-
Just use local power supply as suggest before cat5 should work and worse case buy better cameras as you go along
-
Cheaper to replace alarm fob than car fob though
-
Maybe you lot can send his ip to PayPal of it goes national
-
24v makita here, i have drilled 4" core holes with it before.
If drilling 20mm plus holes through brick or concrete bolcks ect... i start with 8mm, then 12mm, then 16mm ect drill bits. stops the batteries getting caned.
You will make h jealous
Act Lithium Battery Tester
in Members Lounge (Public)
Posted
How much you charge a battery?