MrHappy

move dial to diode test (between 2ac & hFE) touch probe togther & does it buzz?

damaged cable,

dunno,

Many yrs ago I used to buy vertas r8's from my local branch of CEF. IIRC a good few % cheaper than CSD Professional (yes that long ago) They where going to stop stocking them as they had lots of returned items & could not understand why we never sent any back... They used to get

steal the alarm & leave the car ?

Your battery's knacked & I'd assume your panel is overloaded by the current requirements of 2 bell c/w strobes

yes, he's a prick... fob = RP128T4RC On other Risco products its learnt via engineer menu's, unsure on wisdom

its a social experiment, we diagnose those with broken brains by their CAPSLOCKS rants your the 2nd today, should we get a 3rd our NHS funding gets increased....

Not sure how this helps the OP ?

hi.

My spider senses tingle "Aritech" ? I guess a tamper circuit would be used for the external bell ? the 2nd tamper circuit may be used for an internal speaker ?

haveIgotswitchedmodePSU dot com ?

I'd have whipped out my c/card & paid your employer with a smile on my face.... piece of piss to get a charge back on that scam

I've probably got beads on for single cores somewhere on stock, probably last used when enforcers where cream coloured & had no case screw I've got split cores somewhere a telephone bloke gave me at least 16yrs ago...

seen 'em with psu's & internal EWD however I was thinking per core- pic from ACT

retro.... but +1 + any unsed cores to 0v alarmcon, when you used temp cables did you use the same psu ?

If you open the Ewd whilst the controls are in engineering. They normally sound. Some products are able to be placed into an engineer mode & won't sound when the case is opened

I'd assume... A connection to logging print A connection into cortech BMS A provision of things switched by the intruder alarm eg lighting ?

had a good sized spider & lots of midges living in e-line's

IIRC all the elites produce both "mains fail" & "power o/p" when the mains is off I'd guess its something to do with the 4 pin molex pin on the switch mode psu the switch mode psu is also a bit naff & much more likeley to fail compared to transformer

enter code, then enter code & press reset

If you have the contents of your commercial premises insured (your stock may be expensive & portable) the insurer may have certain requires for the alarm eg signalling & holding a URN any thing wired to a telephone is vulnerable to a line cut, systems which text are the carrier pigeons of alarm signalling

you have insurance ?

I'd think you'd be better spending the money on couple of visits to clean the gutter in the autumn rather than alarms... or something like - https://hedgehog-gutter-brush.co.uk/

you need a 1 x Intruder URN & 1 x PA URN I assume new system, so will need 2 zones per PA to produce a confirm