6 replies to this topic

[eazyrog]

Hi all,

I have a Mevier TS700 and its been running fine up until I started messing around with it, need some advice.

The bell box no longer works, The alarm still fully works but no bell box or sd1 working.

Last week I purchased a Mevier SD+1 telephone dialler as I want my mobile to ring soon as the alarm goes off, not just the bell box.

So i connected the trigger input (selv) to my alarm ts 700 panel where the bell box is connected (trig) then 0v & +12v to the Aux 0v and 12v on my ts700.

The SD1+ powers up and i can do a test call to my mobile and works great.

Now i test the alarm by setting if off and it goes off but now siren nor sd1 dialing.

Is anyone able to tell me where i have gone wrong ?

Thanks

[satsuma01]

have you changed anything in the setup / engineers menu, like for example the bell trigger input from a neg state to pos state to trigger.

[norman]

erm it would ring all the time then

[MrHappy]

you've shagged the output ?

[norman]

^^^ would also be my guess.

[RichL]

or poor connection on the bell trigger o/p since you've added another wire.

[jameswilson]

it must be related to the output. So as above id say not connected or you have popped it