Ian2 Posted June 24, 2019 Share Posted June 24, 2019 Hi, Have a groups setup on some storage building and want the alarm to set its self if all zones are ok and no tiggers for 60 min say Staff on site keep forgetting to set the alarm) Is this possible?I cant seem to see any good descriptions of what the 100's of functions do on the Galaxy. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/ Share on other sites More sharing options...
al-yeti Posted June 24, 2019 Share Posted June 24, 2019 1 hour ago, Ian2 said: Hi, Have a groups setup on some storage building and want the alarm to set its self if all zones are ok and no tiggers for 60 min say Staff on site keep forgetting to set the alarm) Is this possible?I cant seem to see any good descriptions of what the 100's of functions do on the Galaxy. From memory JW mentioned that the Siemens unit does this but the galaxy doesn't So I assume is there a way to have relays also report to another device which does a key switch to start it Sounds messy but possible in my view Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485416 Share on other sites More sharing options...
james.wilson Posted June 24, 2019 Share Posted June 24, 2019 You can use autoswt and prewar on the gals you could possibly do something with links from a ready to set type output? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485421 Share on other sites More sharing options...
GalaxyGuy Posted June 24, 2019 Share Posted June 24, 2019 Yes, autoset would be a better choice. You can have a warning sent via self monitoring if the system has not been set by a certain time point. This would allow you to log in to set remotely. The Dimension panels have a count down timer which could possibly be combined with the 'ready' output type, but the Flex links don't support the latch and reflex timers, so you would need an external countdown timer linked to a set input. Probably better to integrate some automation system with the panel if you want something complex. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485423 Share on other sites More sharing options...
al-yeti Posted June 25, 2019 Share Posted June 25, 2019 10 hours ago, Ian2 said: Hi, Have a groups setup on some storage building and want the alarm to set its self if all zones are ok and no tiggers for 60 min say Staff on site keep forgetting to set the alarm) Is this possible?I cant seem to see any good descriptions of what the 100's of functions do on the Galaxy. I have couple of sites on autoset at a certain time works ok for them But if you have weird hours for staff it won't work for you Then you have to find third party system to trigger alarm for you Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485424 Share on other sites More sharing options...
norman Posted June 25, 2019 Share Posted June 25, 2019 Had it on my last house for years and my in laws garage and sheds auto arm with no issue. Nothing is foolproof to a sufficiently talented fool. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485425 Share on other sites More sharing options...
Ian2 Posted June 25, 2019 Author Share Posted June 25, 2019 Ok Im going to use autoset to arm the alarm at knocking off time. Is it possible to locate a RKP in the area ( Group A2) so it controls the group and the existing Office (Group A1 ) carries on as normal? So basically can I locate a new Mk8 to only arm / disarm group A2? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485432 Share on other sites More sharing options...
james.wilson Posted June 25, 2019 Share Posted June 25, 2019 You can an the big gals I don't know the flex as well securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485434 Share on other sites More sharing options...
Ian2 Posted June 25, 2019 Author Share Posted June 25, 2019 Is there an output which indicates all the zones are ok and ready to be armed. I could fix a timer to this output and drive an input for instant set? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485440 Share on other sites More sharing options...
james.wilson Posted June 25, 2019 Share Posted June 25, 2019 yes its ready to set or 'ready' but it works in both set and unset states securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42882-galaxy-flex-autoset-based-on-no-activity/#findComment-485443 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now