RevolvingSteve Posted January 19, 2019 Author Share Posted January 19, 2019 1 hour ago, al-yeti said: Correct , with resistors in place Is it a door contact with no tamper ? Good bloke you can then also get an RF card later I believe and have wireless zones , unless you already have that Already have the RF card, see below! 19 minutes ago, al-yeti said: Sounds ok Great. All seems done but I now have a tamper on the RF PORTAL 105. I don't have any RF Detectors connected? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482189 Share on other sites More sharing options...
al-yeti Posted January 19, 2019 Share Posted January 19, 2019 33 minutes ago, RevolvingSteve said: Already have the RF card, see below! Great. All seems done but I now have a tamper on the RF PORTAL 105. I don't have any RF Detectors connected? Did you fit the spring in the portal? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482190 Share on other sites More sharing options...
GalaxyGuy Posted January 19, 2019 Share Posted January 19, 2019 In the flex you fit a jumper on the tamper header of the portal. There are a few unused jumpers on the existing headers if you don't have any spare. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482196 Share on other sites More sharing options...
RevolvingSteve Posted January 20, 2019 Author Share Posted January 20, 2019 On 19/01/2019 at 20:47, GalaxyGuy said: In the flex you fit a jumper on the tamper header of the portal. There are a few unused jumpers on the existing headers if you don't have any spare. Could you elaborate? Im not at the house until tomorrow but will check it out. On 19/01/2019 at 18:28, al-yeti said: Did you fit the spring in the portal? Again, you'll have to elaborate a little... Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482214 Share on other sites More sharing options...
norman Posted January 20, 2019 Share Posted January 20, 2019 I love galaxy but that had to be the fugliest rkp available. Nothing is foolproof to a sufficiently talented fool. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482217 Share on other sites More sharing options...
RevolvingSteve Posted January 20, 2019 Author Share Posted January 20, 2019 5 minutes ago, norman said: I love galaxy but that had to be the fugliest rkp available. You mean the panel or the install Its on a temp wall for now until the room is done Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482218 Share on other sites More sharing options...
norman Posted January 20, 2019 Share Posted January 20, 2019 No, I meant the actual design of it, it's hideous and looks like a school electronics project. Nothing is foolproof to a sufficiently talented fool. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482219 Share on other sites More sharing options...
RevolvingSteve Posted January 21, 2019 Author Share Posted January 21, 2019 On 19/01/2019 at 20:47, GalaxyGuy said: In the flex you fit a jumper on the tamper header of the portal. There are a few unused jumpers on the existing headers if you don't have any spare. Thats the only wire I have connecting the RF to the board Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482224 Share on other sites More sharing options...
al-yeti Posted January 21, 2019 Share Posted January 21, 2019 1 hour ago, RevolvingSteve said: Thats the only wire I have connecting the RF to the board Because it's in main box fit jumper next to the top switch Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482225 Share on other sites More sharing options...
al-yeti Posted January 21, 2019 Share Posted January 21, 2019 On 19/01/2019 at 20:47, GalaxyGuy said: In the flex you fit a jumper on the tamper header of the portal. There are a few unused jumpers on the existing headers if you don't have any spare. As Mr galaxy said Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/3/#findComment-482226 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now