Scan9210 Posted January 4, 2018 Share Posted January 4, 2018 Hi, just been to a job today involving a Citadel XR2. Looks like an ADE Accenta/Optima. Managed eventually to default it to factory settings and program it (mostly) . The programming seems to be a mixture of original Optima (EE times) and some G3. Also is set to Engineer reset by default unless I’ve inadvertently done this or just defaulted codes only. Does anybody have a link for the Engineer Manual to save the detective work. Thanks Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/ Share on other sites More sharing options...
MrHappy Posted January 4, 2018 Share Posted January 4, 2018 There's lot of different ade products which look the same & it gets worse when rebranded... I'd prefer to bin it off Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472823 Share on other sites More sharing options...
Scan9210 Posted January 4, 2018 Author Share Posted January 4, 2018 Thanks but panel works fine and the customer would rather reset themselves with the engineer code than buy a new one. I just need the manual and it will be sorted out in seconds. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472830 Share on other sites More sharing options...
MrHappy Posted January 5, 2018 Share Posted January 5, 2018 You have picture of the PCB ? Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472831 Share on other sites More sharing options...
petrolhead Posted January 5, 2018 Share Posted January 5, 2018 https://www.ebay.co.uk/itm/Haynes-Car-Manual-Mk2-Fiesta-Xr2-/152843816501 3 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472832 Share on other sites More sharing options...
Scan9210 Posted January 5, 2018 Author Share Posted January 5, 2018 Sorry didn’t take a photo but I would say looking at the optima/accenta 8 manual it is the same. It’s not like the g3. The entry and exit timers are programmed like the original optima ie 1 or 2 from the engineer mode followed by 01 for 10 seconds etc but the engineer code etc goes in like the g3. I would guess the engineer reset option would be in the system flags like the accenta 8 but didn’t try this on site. Would be nice to have the manual to eliminate the trial and error. Thanks Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472834 Share on other sites More sharing options...
Scan9210 Posted January 5, 2018 Author Share Posted January 5, 2018 6 hours ago, petrolhead said: https://www.ebay.co.uk/itm/Haynes-Car-Manual-Mk2-Fiesta-Xr2-/152843816501 Haha I remember them Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472835 Share on other sites More sharing options...
MrHappy Posted January 5, 2018 Share Posted January 5, 2018 22 minutes ago, Scan9210 said: Would be nice to have the manual to eliminate the trial and error. IIRC xr1 is panel with on board keys x2 is panel & keypad when the ADE product changed models Senate still called there's XR You need product knowledge of ADE pcbs to you guess what your "xr"is really is There not graded & the programming makes little sense to me, I take the view that paying me an hr to program it is better spent fitting better controls Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472836 Share on other sites More sharing options...
al-yeti Posted January 5, 2018 Share Posted January 5, 2018 8 hours ago, MrHappy said: You have picture of the PCB ? Need picture of PCB , otherwise keeping guessing , or if it's some mutant PCB even more guessing Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472837 Share on other sites More sharing options...
sixwheeledbeast Posted January 5, 2018 Share Posted January 5, 2018 We have a good range of ADE (Concept/Optima/Accenta) manuals in our engineers downloads section, accessible to trade verified members. We do not distribute manuals here in the forums for security reasons as per our guidelines. If similar to Accenta G3 it will be in Flags so:- Option 3 > Flag 3/4 (off) > Reset This shouldn't be on as default so I can only assume the panel wasn't defaulted fully or you switched it on by accident. 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41839-citadel-xr2/#findComment-472838 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now