John 4 Posted October 17, 2017 Share Posted October 17, 2017 hi , i have just cut a wire to a PIR on my alarm system........actually just knicked one of the coloured wires within cable...... the internal siren sounded and it seems all power to other PIR's and main panel has been lost ....cable wires are all connected now. any ideas .... thanks Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/ Share on other sites More sharing options...
aissecur Posted October 17, 2017 Share Posted October 17, 2017 I would suspect a fuse has blown in the panel. When was the last time the unit was serviced as this would be good time to get a professional in to give it a once over whilst hopefully repairing the system? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469742 Share on other sites More sharing options...
John 4 Posted October 17, 2017 Author Share Posted October 17, 2017 (edited) Hi yes your correct... fuse blown now it wants the engineer code which I thought was #### enter but that's not working .. so panel working but need the eng code again any ideas and thanks for reply hiw much is a service ?? Edited October 17, 2017 by sixwheeledbeast Removed code Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469750 Share on other sites More sharing options...
sixwheeledbeast Posted October 17, 2017 Share Posted October 17, 2017 The installer would use there own code in the system. We do not give out codes, manuals or defaulting information here for security reasons. If you can't contact the original maintainer, I would recommend you call a few local companies and inquire about a service. Karisma's are quite an old panel now, I have known even well maintained ones to have iD biscuits fail and NVM issues. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469753 Share on other sites More sharing options...
John 4 Posted October 17, 2017 Author Share Posted October 17, 2017 I don't know original installer ... there must be some way of putting in a new engineer code ..... thats all it seems to need ..... anyone know how ?? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469758 Share on other sites More sharing options...
al-yeti Posted October 17, 2017 Share Posted October 17, 2017 10 minutes ago, John 4 said: I don't know original installer ... there must be some way of putting in a new engineer code ..... thats all it seems to need ..... anyone know how ?? Well you will need to default the system which may mean reprogramming it , you could pay someone to do once over and provide you with it , but if it's cost excersice then may reflect what your trying to protect meaning it's low priority Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469764 Share on other sites More sharing options...
aissecur Posted October 17, 2017 Share Posted October 17, 2017 (edited) in order to change the engineer code (if unknown) it will mean a full default of the system and would require it being fully re- programmed from scratch. Unless you are fully ofay with alarms and competent I strongly suggest this is carried out by a competent alarm engineer. Edited October 17, 2017 by aissecur spelling mistake Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469775 Share on other sites More sharing options...
PSE Posted October 17, 2017 Share Posted October 17, 2017 You could get someone to default the engineer & user codes only, no need for a full default. A decent alarm co / engineer could default them within no time at all. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469781 Share on other sites More sharing options...
PeterJames Posted October 17, 2017 Share Posted October 17, 2017 5 hours ago, PSE said: You could get someone to default the engineer & user codes only, no need for a full default. A decent alarm co / engineer could default them within no time at all. Are you sure? I didnt think you could with ADE panels, its been a long time since I did any programming mind. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469797 Share on other sites More sharing options...
al-yeti Posted October 17, 2017 Share Posted October 17, 2017 Think it's a full default on these, it's the manager code you can reset via procedure , engineer is full default I believe Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41645-karizma-control-panel-blank/#findComment-469799 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now