Jump to content
Security Installer Community

Recommended Posts

Purchased a new battery for the alarm system which is a risco cpx with a gardec 8 zone expander. The original battery in the alarm system is 5 years old so thouht better change it

The battery original fitted is a genessis np2.3 -12.  12v 2.3ah

 

I have fitted a new same make battery genessis np2.3-12 FR.    12v 2.3Ah

 

Upon fitting the new battery i am niw getting a fault on the key board that says. Fuse / battery fault  causing the internal alarm to go off.

 

Soon as  swap it back to my old battery the fault has gone.

 

Do you need to set or adjust any thing on this alarm system so it knows it has a new battery?

 

Or is it more than likely i have a faulty new battery or it is not compatible to my old one? As it says on the new battery NP 2.3 -12 FR. 12v 2.3ah.   And my original one does not say FR

 

Or is it just a straight forward plug and swap over no programming issue when changing the control panel battery?   so i have a faulty new battery?

 

Has any one come across this issue before please?

 

 

5 minutes ago, datadiffusion said:

Hang on, lets get the voltage first!

I think we can all guess what the problem is and the place of purchase will only confirm what we are all thinking. 

3 hours ago, PeterJames said:

I think we can all guess what the problem is and the place of purchase will only confirm what we are all thinking. 

 

Spoilsport.

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.