Veritas R8 help req

[Keighley]

just replaced a blown caps on the main board of a veritas R8 alarm

got everything working again the only thing that I cannot do is it is programed to accept to arm it with just pressing full or part and I would like to have to put the user code in then full or part

I have looked  but cannot find a answer

I know I will get a answer here

thank you in anticipation

[sixwheeledbeast]

If you have blown caps it's likely to be old and not have the one button set feature.

Red LED on CPU?

[Keighley]

yes it does it all works now but it arms with just pressing  full

before it blew I had to put the user code in then arm

 

[MrHappy]

you want 1 button set enabling or disabling ?

[Keighley]

disabling

I want to put the user code in then arm

Edited November 20, 2016 by Keighley

[sixwheeledbeast]

So it has a RED LED and you can just press full?

Pretty sure it doesn't have that option.

Later models are Menu 00 option 3

[Keighley]

there is no red led just the green one

[Keighley]

here is a photo of the key panel

in the manual it says that it can be programed so it is a one button arm via the engineer code but it doesn't tell you how or how to disable it

Edited November 20, 2016 by Keighley

[datadiffusion]

I am pretty sure he means the single led in the middle of the large white system box, rather than the keypad

[Keighley]

there is only one green one at the top and in the centre