1animal1 Posted November 9, 2016 Author Share Posted November 9, 2016 (edited) Edit - having re-read you can indeed select multiple attributes. The devil is in the detail! I presume it doesn't matter that I've changed the part set settings via the part set menu? Edited November 9, 2016 by 1animal1 Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted November 9, 2016 Share Posted November 9, 2016 nope 1 Link to comment Share on other sites More sharing options...
1animal1 Posted November 9, 2016 Author Share Posted November 9, 2016 Swb, do you happen to know how long the settings and learnt devices are saved when battery and mains are withdrawn? I've got an IP board, remote panel and two more pirs (wired to remote)to wire in, in the next week. I didn't want to start setting users etc up if it'll all likely disappear. Link to comment Share on other sites More sharing options...
datadiffusion Posted November 9, 2016 Share Posted November 9, 2016 Indefinitely 1 So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
1animal1 Posted November 9, 2016 Author Share Posted November 9, 2016 Many thanks Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted November 10, 2016 Share Posted November 10, 2016 Non Volatile Memory 1 Link to comment Share on other sites More sharing options...
1animal1 Posted November 10, 2016 Author Share Posted November 10, 2016 (edited) Thanks chaps.... I've now got all the wireless stuff fitted - still have bell tamper and aux tamper showing for the X-BE bell - although I'm still to activate the battery in the box and finish commissioning instructions (Global options). That said it sounds like i need to omit these via the panel as the X-Be only has 5 contacts - Tamper,bell, strobe, 0v and 12v... where as other models appear to have a tamper circuit additionally. Edited November 10, 2016 by 1animal1 Link to comment Share on other sites More sharing options...
al-yeti Posted November 10, 2016 Share Posted November 10, 2016 What you in about dude? What you mean there's no bell tamper? In the bell or what your looking at on the panel Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted November 10, 2016 Share Posted November 10, 2016 Grade 3 boxes have extra tampers and fault OPs, I guess only a Grade 2 box (5 wires) and aux tamper will not be used? Link to comment Share on other sites More sharing options...
1animal1 Posted November 10, 2016 Author Share Posted November 10, 2016 Yep Grade 2 Premier sounder - the new X-BE. It only has those 5 contacts and then 2 additionals which i read, should be left alone with MSW written across them Link to comment Share on other sites More sharing options...
Recommended Posts