Newbietexecom24 Posted July 30, 2016 Author Share Posted July 30, 2016 Sorry, but I'm totally confused. I'd be very grateful if you could possibly edit the picture above and do two new arrows pointing towards where you want me to connect the wires. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted July 30, 2016 Share Posted July 30, 2016 Bell and 12v Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Newbietexecom24 Posted July 30, 2016 Author Share Posted July 30, 2016 3 hours ago, james.wilson said: Bell and 12v So 12v = Red & Bell = Black? Quote Link to comment Share on other sites More sharing options...
Rulland Posted July 30, 2016 Share Posted July 30, 2016 Yup, as per my previous post chap. Quote Link to comment Share on other sites More sharing options...
Newbietexecom24 Posted July 30, 2016 Author Share Posted July 30, 2016 1 minute ago, Rulland said: Yup, as per my previous post chap. Sorry rulland as I didn't notice your previous post. Thank you again. I shall try this first thing in the morning. Is it safe for me to disconnect and reconnect whilst the unit is still powered or would I need to power everything down? Quote Link to comment Share on other sites More sharing options...
Rulland Posted July 30, 2016 Share Posted July 30, 2016 Safe as long as you don't put stuff in the wrong hole lol. Quote Link to comment Share on other sites More sharing options...
Newbietexecom24 Posted July 30, 2016 Author Share Posted July 30, 2016 Lol. I'll try not to. I'll let you know how I get on mate. Thanks again to everyone. Quote Link to comment Share on other sites More sharing options...
Rulland Posted July 30, 2016 Share Posted July 30, 2016 No probs mate. Quote Link to comment Share on other sites More sharing options...
Newbietexecom24 Posted July 31, 2016 Author Share Posted July 31, 2016 Evening. Unfortunately the SB didn't work with the suggestions made. Whenever I connected the black wire to the bell, it continued to beep. I then tried 0v, the aux, the -, but connecting to any of these meant the SB just continued beeping non-stop. The only solution was to plug the black wire into the Speaker - and this stopped it. Now it only sounds whenever I do a speaker test or when the alarm actually triggers Quote Link to comment Share on other sites More sharing options...
al-yeti Posted July 31, 2016 Share Posted July 31, 2016 Means your bell is already zero , did you change the bell trigger polarity by mistake at some point as they are normally switch negative by default Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.