Rookie292 Posted July 23, 2016 Share Posted July 23, 2016 Hi everyone , Rookie here signing up for some wisdom . A bit about myself . I did 2 years electrical engineering before joining the navy to be all that I can be . After busting naughty fisherman for a bit I decided to leave and join a security firm providing tech support over the phone . Now I'm a rookie tech doing installs and service. Now the reason I joined this forum is the lack of any sort of structured training . Correct me if I'm wrong but it seems to be centred around product knowledge than anything. Most of my learning is on the job and self initiated . IVe been taking old panels home and familiarising myself with programming . Now so far ive learnt about 1. Normally open and close circuits 2. End of line and double end of line and how it's crucial for future servicing 3 . Zone doubling ( especially on older paradox panels) 4 basic cctv setups , and diagnosing faults 5 building control panels ( concept panels utilising my drill for that perfect twist and boot lacing ) all that good stuff . I would really appreciate any reading that would be beneficial for me . I'll trawl through this forum as a start of course . But what I noticed is that it's nowhere near as structured an apprenticeship as say a sparky anyway ..... Looking forward to learning the craft from the gurus Quote Link to comment Share on other sites More sharing options...
norman Posted July 23, 2016 Share Posted July 23, 2016 Hello and welcome, http://www.tavcom.com/ have some good courses I hear. Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
james.wilson Posted July 23, 2016 Share Posted July 23, 2016 hello have a look at skills for security too Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
MrHappy Posted July 23, 2016 Share Posted July 23, 2016 Are you working or planning to work in the UK ? Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Nova-Security Posted July 23, 2016 Share Posted July 23, 2016 7 hours ago, Rookie292 said: IVe been taking old panels home and familiarising myself with programming . Now so far ive learnt about 1. Normally open and close circuits 2. End of line and double end of line and how it's crucial for future servicing 3 . Zone doubling ( especially on older paradox panels) 4 basic cctv setups , and diagnosing faults 5 building control panels ( concept panels utilising my drill for that perfect twist and boot lacing ) all that good stuff . I would ignore the training courses as you have probably learnt more than they will teach you, going from what you have said above. Taken the panels home and learning them is the best way. Drill for the perfect twist.............A big no, but i know other that do it. Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
Rookie292 Posted July 23, 2016 Author Share Posted July 23, 2016 Awesome , thanks for the advice I don't plan on working in UK anytime soon ,possibly in the future after I'm fully trained . The industry there is better than here in NZ from the looks of it . 4 hours ago, Nova-Security said: I would ignore the training courses as you have probably learnt more than they will teach you, going from what you have said above. Taken the panels home and learning them is the best way. Drill for the perfect twist.............A big no, but i know other that do it. Using the drill to twist cable , is it because it damages the cores ? I thought so . It's interesting learning from the senior techs here . Each has their own way and depending on which technician I'm learning from I do things their way . For example one technician solders all his joins , another technician swears by terminal blocks and others just use gel crimp Thanks for all the comments and ill definetly take them on board . I'm definetly considering travelling after I'm trained . The industry in NZ is very very small and Dominated by the big 2 , Tyco and Chubb . Quote Link to comment Share on other sites More sharing options...
MrHappy Posted July 23, 2016 Share Posted July 23, 2016 1 hour ago, Rookie292 said: Using the drill to twist cable You'd have to be a total mong to damage cable pairs when using a drill to twist, Quote Mr Veritas God Link to comment Share on other sites More sharing options...
PeterJames Posted July 24, 2016 Share Posted July 24, 2016 I wouldnt use a drill personally it's not that hard to do it manually, and you don't save any time or get it any neater with a drill Hello btw and welcome, I have a mate in NZ Ian Brand do you know him? Quote Link to comment Share on other sites More sharing options...
Amps Posted July 24, 2016 Share Posted July 24, 2016 1 minute ago, PeterJames said: I wouldnt use a drill personally it's not that hard to do it manually, and you don't save any time or get it any neater with a drill Hello btw and welcome, I have a mate in NZ Ian Brand do you know him? I don't think that is true. Not mention the amount of effort you save using a drill makes it the first choice for me. You've spoken like a true office boy there Mr James. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted July 24, 2016 Share Posted July 24, 2016 I now use that wire wrapping tool jef posted a bit ago. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.