al-yeti Posted July 13, 2016 Share Posted July 13, 2016 11 hours ago, Nick Sue Fryer said: no its set to static ip . we are able to view ok over the network. it must be set to static because the external ip is dynamic. So remote access on a PC is the main issue now yes? Quote Link to comment Share on other sites More sharing options...
james.wilson Posted July 13, 2016 Share Posted July 13, 2016 is the p2p service still available? also if using a static address on the lan have you also configured the gateway and dns correctly Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Nick Sue Fryer Posted July 13, 2016 Share Posted July 13, 2016 I don't know if the p2p is still available I have no info on that. what is odd is that there is only a two digit space to enter a port number. Port 80 is used by default but I understood this was an http for use on the lan only? there is no other option to enter any other port numbers anywhere else. ddns is set up using dynds, I have pinged the port which comes back as open. Just about to give up and suggest a new dvr. i imagine there must have been an install disk with the p2p info on etc. but that is long gone. Quote Link to comment Share on other sites More sharing options...
dufjax Posted July 13, 2016 Share Posted July 13, 2016 (edited) With most of these type DVR's you just need to open port 80 in the network router and point it to the IP address of the DVR (192.168.?.?) Port 80 is the universal http port and it's the port this website is using. P2P is probably Peer 2 Peer and without know the DVR and what it's trying to achieve with P2P I don't think it is of use in this instant. Edited July 13, 2016 by dufjax Quote Link to comment Share on other sites More sharing options...
Nick Sue Fryer Posted July 13, 2016 Share Posted July 13, 2016 Thanks all for your replies and support. At the very last point of me throwing the towel in I went to site again, deleted the port forwarding setup in the router and re entered the settings and it all fell into place. No idea why this changed it but customer now a happy bunny and me just a little bit more grey on top. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 14, 2016 Share Posted July 14, 2016 Home hub?? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
al-yeti Posted July 15, 2016 Share Posted July 15, 2016 2700? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.