Philg1965 Posted July 27, 2015 Author Share Posted July 27, 2015 Hi When I changed the batteries the alarm activated for each shock sensor I just put in my code and it was fine ? I better check the tamper switch under the RFX cover ? I removed the RFX cover and silenced the alarm. Then put it into learn mode and scrolled through but no number 11 was displayed. The numbers were in the twenties ? I was pushing the button under the Display and believe the delete button is under neath this one. Any ideas gratefully received Thanks for your help Phil Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425437 Share on other sites More sharing options...
sixwheeledbeast Posted July 27, 2015 Share Posted July 27, 2015 When I changed the batteries the alarm activated for each shock sensor I just put in my code and it was fine ? I better check the tamper switch under the RFX cover ?Yes But if you have been pressing buttons in there you could have put the RFX into programming mode. This may stop the tamper from clearing. I removed the RFX cover and silenced the alarm. Then put it into learn mode and scrolled through but no number 11 was displayed. The numbers were in the twenties ? I was pushing the button under the Display and believe the delete button is underneath this one.Not a good idea to be playing in there when your not sure what you are doing. You may have deleted any number of your wireless devices from the RFX. You could have just omitted Zone 11 from the keypad and still had a working system, I believe you will now need an engineer. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425441 Share on other sites More sharing options...
Philg1965 Posted July 27, 2015 Author Share Posted July 27, 2015 Hi Thanks for the reply I tried to omit zone 11 but it came up with a cross after the 11 on the keypad which meant that it could not be omitted ? Will have another go later when I am home. for the post Phil Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425442 Share on other sites More sharing options...
sixwheeledbeast Posted July 27, 2015 Share Posted July 27, 2015 I tried to omit zone 11 but it came up with a cross after the 11 on the keypad which meant that it could not be omitted ?If that circuit is not Omit Allowed (this is possible) it has not been programmed correctly initially. IIRC to omit you enter your code followed by X this will then ask you if you want to Omit a Zone number. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425443 Share on other sites More sharing options...
Philg1965 Posted July 27, 2015 Author Share Posted July 27, 2015 Hi I thought it funny that the RFX didn't give a zone11 so think you are right it had been programmed wrong. Will try that to omit the zone if I can lose the tamper alert Thanks for your help Phil Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425444 Share on other sites More sharing options...
Philg1965 Posted July 27, 2015 Author Share Posted July 27, 2015 Hi Can't lose the tamper now... When I did the batteries last year was ok... Is it engineer visit now then ? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425464 Share on other sites More sharing options...
9651 Posted July 27, 2015 Share Posted July 27, 2015 You're in expander 2 Expander 1 is addressed zones 9-16 Expander 2 is addressed zones 17-25 Time for an engineer fella, no point just stabbing in the dark Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425466 Share on other sites More sharing options...
norman Posted July 27, 2015 Share Posted July 27, 2015 Worked ok for Oscar. Nothing is foolproof to a sufficiently talented fool. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425467 Share on other sites More sharing options...
datadiffusion Posted July 27, 2015 Share Posted July 27, 2015 http://www.redstaplerchronicles.com/wp-content/uploads/2009/05/oscar-the-grouch.jpg ? So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425470 Share on other sites More sharing options...
james.wilson Posted July 27, 2015 Share Posted July 27, 2015 Worked ok for Oscar. he was shooting securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38841-scantronic-alarm-issue/page/2/#findComment-425509 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now