He was just confirming that output is for sound to keypad

Chime is in manual ? Which came with panel in this case

Ok thanks a lot. I will give it a try and let you know.

 

thanks for all your help gents!

Yes just to be clear the speaker goes to the two terminals with the speaker symbol 'above' (on your upright pic) the Strobe - and + terminals. Not 'SOUND'.

 

If you connect a speaker to the bell, yes, the speaker at least will probably go pop!

Next to you mean?

We are in East London and High Wycombe, can any of you train us on this please? We will have our test equipment and of course we will pay for your time you spend with us for training. Am I allowed to put my contact number here?

Train you for what?

PerhapS try

http://www.tavcom.com/distance-learning-courses/intruder-perimeter-alarms/

And others

We safely managed to install it and not blow anything up )

however the sound of the speaker is so low that we can actually hear the keypad from the other room and not the speaker unless you put your ear on it. Is there a way to increase the volume output? the speaker is nearly at a distance of 10 meters from the panel. 

Any bright ideas?

Volume pot on the main board.

I am doing the tavcom alarm course in oct and have done a course there before.  I would go with al-yeti on that one.

I am doing the tavcom alarm course in oct and have done a course there before.  I would go with al-yeti on that one.

how did u find it?