Also some networks don't get the tones right.

Try pulse dial aswell as tone.

Edited June 16, 201412 yr by kwc

No problem using the landline, house phone to contact any of the nominated mobile numbers or the landline number mentioned above.

When the Informer dials to, for example, my mobile phone my mobile does not receive a call. 

 

Ok, I've done a recording of a test call to my mobile from the Informer Dialler. It is with the modem switched off but with the house phone system connected, but obviously not in use.

 

Here's the link:

https://app.box.com/s/m4e0rxj6wtkqwn6xm9yo

 

The dial tone opens the recording then at 13secs you can hear the engaged/busy signal which continues to the end of the recording.

 

Tom.

What's the italian message saying?

The first part of the message says where the alarm is taking place i.e. the house of Dani and Tom. The second part indicates the type of alarm, in this case a burglary.

 

Tom.

kwc,

How would I switch between tone and pulse?

 

Tom.

Id suggest the earlier post of adding a delay before dialing the number was worth a try

Is there a way to introduce a delay as I can't find any way to do that in the instructions?

 

Tom.

try a * or even a P

I don't understand how that relates to the Informa.

 

Tom.

I'm not familiar with the unit but prefix the tel # with either a * or a P