Jump to content
Security Installer Community

Imnotshankled

Member
 View Profile  See their activity

  • Posts

    316

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Posts posted by Imnotshankled

    Full home security options

    in !!..DIY Installers..!!

    Posted

    4 hours ago, MarkC said:

    Apologies if this is in the wrong place. New here but will be having a good look around as there a few jobs on my list which I'm sure the info here will help with. 

     

    I'm looking for some recommendations, I want to install a basic house alarm and cameras. When I say basic, I'm thinking a couple of door contacts, maybe a passive or two in shed and bike store and two cameras.

    The cameras would be located to look down the front drive and the other down the side of the house to look at the back/bike storage.

    I'm pretty handy and can set up tech but I'm lost on the best options.

    The yale system looks pretty good for the price, but are the cameras ok? Any local storage options etc.

    One system/app to do it all would be nice, but it's not needed should a separate camera/alarm system be better?

    Running power to the cameras isn't an issue, either mains or ethernet. Currently, I think I'd prefer powered over wireless.

    I don't want to be paying monthly storage charges.

    Thanks in advance.

    The DIY tat is ****

     

    For the alarm recommend texecom ricochet kit  with a smartcom

     

    Cctv I recommend qvis for Cctv 

    Menvier TSNETLCD to Menvier TSD1 + UK

    in Control Panels (Public)

    Posted

    36 minutes ago, Serdar13 said:

    Hiya everyone. Managed to find a brand new unused menvier TSNETLCD and just fitted and all working as like first installed. Fitted 'MENVIER TSNET PROX PR1' too but any fobs tried could not activate them. Engineer said probably the Menvier TS690 not compatible with 'PROX PR1'. is this the case and any way i can get the proximity fobs working?

    I believe only the 900 and 2500 could run prox tags

    Visonic powermaster pm33 question

    in !!..DIY Installers..!!

    Posted

    22 hours ago, Tspoon1811 said:

    Hello All.

     

    I was wondering if someone can advise or guide me. On my previous powermax system, whenever I armed away or disarmed, there was a voice alert to give me the system system status. Also when I armed away there were countdown beeps. Is there a way I can do that with my powermaster pm33 panel? I cant seem to find the option anywhere.
     
    You help will be much appreciated.
     

    You can't on the power g series 

    Castle / Pyronix Euro 46 Area set

    in General Security & Fire Queries

    Posted

    13 hours ago, adrian41uk said:

    I'm trying to get my head around setting up a Euro 46 to do area set.

     

    The scenario is a small factory that has decided to sub-let the upstairs of an office block. These will share a common lobby area.

     

    I need to reconfigure the panel such that the tenants can only unset/set the sensors in their space (hence leaving the main factory set) but the factory staff and unset all the zones. 

     

    The bit I don't get is.... If the tenant unsets the panel & then the factory staff arrive later...... what triggers the second entry/exit to cause them to enter a code to unset the main factory?

     

    Also, the EURO46 has areas 0, 1, A, B, C D.    Whatis the difference between areas 0 & 1 and A, B, C, D?

     

    Thanks in advanced for your help - I've installed many a panel in the past but this is the first time I've need to configure one for anything other than full set!

     

    Adrian

    What you want to do is called partitions 

     

    The easiest way to do this is to assign each zone to either set A or Ser B then give the customer a code that can only set that area 

    What happened to data diffusion

    in Members Lounge (Public)

    Posted · Edited by Imnotshankled

    2 hours ago, MrHappy said:

    I'm in work on Saturday doing paperwork, cleaning, tidying ect...

     

    I had 14 telephone calls, booked 5 jobs for the week & attended a pub in the city centre

     

    no breakfast, no lunch, a packet of jam & cream foxes biscuits afternoon as had to buy milk to make & now sat here now eating a Tesco Sandwich on the couch at home  

     

    There have been far too many days like this, 

    Well you lucky git  I spent today replacing a panel with 40cm clearance between a wall and a red hot freezer back 

     

    Tomorrow should be a easy job replacing a exploded veritas 8

    Wifi Jammer used on break in to knock out ring doorbells

    in Members Lounge (Public)

    Posted

    2 hours ago, PeterJames said:

    When the doorbell first came out I tried one and they are nothing like the advert would have you believe, they didnt even work that well locally. Since then I tried cheapo Chinese doorbell 7 out of 10, Hik 4 out 10, Daha 6 out of 10., Ring I could only give 4 out of 10. 

    When people ask me why I always quote hardwired if I can, my usual answer is additional annual fees due to batteries, but I will be adding you cant jam hard wired

    The one I had the best luck with was the Google nest one

    20220827_123237.jpg

    Wifi Jammer used on break in to knock out ring doorbells

    in Members Lounge (Public)

    Posted

    2 hours ago, james.wilson said:

    A member of my team at work had an incident last week. 3 people tried to steal his car (mx5)

    However most of the street have ring doorbell instead of cctv and all of them didnt work during the incident.

    This isnt the first time ive suspected jamming but is this on the rise?

    They are incredibly easy to jam I found out  one of my sites had a microwave on the other side of the wall which caused the doorbell to not work 

    Texecom veritas

    in Guest Forum

    Posted

    13 hours ago, Tally1001 said:

    Hi All

    I am in the middle of awaiting a new alarm been installed , never had an issue apart from the tamper circuits going off when new keypads was fitted by the electrician a while ago and the tamper circuits was bridged out to stop the alarm going off , I had the power off today and the alarm kept going off showing tamper alarm and inputting the code only stopped it for 1 minute. just wondering what caused it , not a problem as power back on and it ok now  

    thanks 

    When have you last replaced the battery 

    accord xpc keypad low battery noise

    in Control Panels (Public)

    Posted

    9 hours ago, Chinomoreno said:

    Hi,

     

    I have inherited an old ADT alarm system and no contract (accord xpc). Unfortunately overnight the low battery noise has woken the family up 4 times and only stops when I use the fob (downstairs!)

     

    Is there anyway of turning the noise off for good or at least for a few days till I get someone to change the battery? Other systems it seems you can use the # or off buttons…but that doesn’t seem to apply to this model?

     

    I have checked the accord xpc manual - but nothing there unfortunately. 


    Seriously any help v much appreciated.  Losing my mind at 5am ?

    Enter code into keypad 

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept