[Veritas 8 part set entry tone]

9 minutes ago, jonwillis said:

 

Both mine and my mom's are wired.

My alarm, The Orisec, had a WiFi card fitted so I can control it from my phone and away from home, it can be upgraded with another module to allow wireless sensors to be added at a later date too.

I only fit wired and very rarely fit wireless 

 

I always fit wifi comms on all my systems 

 

Don't worry about Al yeti  they are just a yeti who escaped the cage

[Veritas 8 part set entry tone]

4 hours ago, al-yeti said:

Who fitted it? Logan security?

OI

 

be grateful I don't fit risco 

[Texecom Expander Help]

4 hours ago, al-yeti said:

There's no low current mode? 

Lc jumper

[Texecom Expander Help]

21 minutes ago, sixwheeledbeast said:

I did mention this in your Veritas thread, panels generally only have enough capacity to supply themselves, a keypad, sensors and one SAB.

The maximum current that can be supplied by it's power supply is not always the limiting factor, you do calculations based on standby battery capacity.

If you have 2 bells there is a low current mode on most new texecom SABs to let you get away with this 

[Tsi broke again]

2 hours ago, al-yeti said:

For the jobs they don't want ? Or there own clients ?

For clients in my area 

Then again can't complain there's alot worse 

[Qvis viper now NDAA compliant]

The qvis viper is now NDAA compliant 

[Tsi broke again]

15 minutes ago, sixwheeledbeast said:

Doing work for nothing or pocket money helps nobody. It's bad for the industry as a whole. You are being used and are liable for your work.

Everyone wants something as cheap as possible. You just don't realise the bigger picture. 

Even in your google review responsiveness is higher than value and it sounds like you charge next to nothing...

 

I/We don't have to point this out, do what you want...

In fact generally we don't have to post anything here, but the reason we participate is because we what to discuss issues around the trade and generally move the industry forward.

 

I have public liability so I am fine 

[Tsi broke again]

34 minutes ago, Imnotshankled said:

Yes I often help quite a few local company's when they are busy 

These companies are recommending me all the time for local clients aswell 

[Tsi broke again]

7 minutes ago, sixwheeledbeast said:

help?

Yes I often help quite a few local company's when they are busy 

[Tsi broke again]

3 hours ago, sixwheeledbeast said:

It's not sustainable and in the meantime doing over local legit businesses.

. . . And I am helping out those said businesses 

[Tsi broke again]

2 hours ago, norman said:

Reviews won't buy your fancy dress costumes. 

I don't really want money  for complicated reasons  which to be honest are way above my understanding 

[Tsi broke again]

27 minutes ago, MrHappy said:

 

low mileage veritas, full service history.....

 

 

you need the recurring revenue of maintenance, even if you charge 50p & a lollipop...

I do  get reoccurring revenues such as a flat battery 

 

 

Then again people seem happy so I am happy with that too

[Scantronic 9751 panel and issue with attached panic alarm]

Unfortunately Scantronic doesn't lock out the zone after it's triggered  so if the device is faulty there's nothing you can do other than put your code in when it goes off or repair it 

[Tsi broke again]

5 hours ago, MrHappy said:

 

are these in the customer's premises or all securing your shed ?

These are all the panels I have replaced 

[Tsi broke again]

4 hours ago, al-yeti said:

Atleast he is busy yeah?

I got 24 veritas r8, 3 Scantronic 9448s, 2 accenta g4 panels, 6 galaxys, 2 ade concepts, risco lightsys, gardtec 800, 3 texecom premiers and a RSI videofied panel

 

so I count that as a win and reasonable pay

[Looking for manuals for Scantronic homelike 2020]

8 minutes ago, james.wilson said:

That's definetly a scanny label

I just don't know exactly how to set it up  I know I need to use a phone 

[Orisec Engineer code stopped working]

Just now, james.wilson said:

Fyi I started writing a huge opinion piece

Deleted it

All opinions are valid 

[Orisec Engineer code stopped working]

2 minutes ago, al-yeti said:

2 hours ago, Imnotshankled said:

 

Dude do orisec sell to general public then without account

No 

[Orisec Engineer code stopped working]

6 minutes ago, james.wilson said:

Do orisec know you undo their whole trade and direct only? I don't think they class themselves as amazon. 

...

[Looking for manuals for Scantronic homelike 2020]

1 minute ago, james.wilson said:

Isn't that the ill fated menvier one? 

 

[Looking for manuals for Scantronic homelike 2020]

If anyone has the manuals for this please let me know 

[Orisec Engineer code stopped working]

2 minutes ago, macca4848 said:

Its been working for a year no problems.  I just moved it and put a new battery in and now its giving me a warning...i might just change the battery and see if it solves

You didn't do that already?

[Orisec Engineer code stopped working]

3 minutes ago, macca4848 said:

The one that's giving me problems was direct from orisec...but i have bought a couple of other orisec boxed ones from ebay - are you going to tell me they are rejects from Orisec

If you ordered it from contact orisec and they will send you a shipping label and a replacement for free   and tbh if you are using the in panel receiver don't expect more than 5m range without a external antenna 

[Orisec Engineer code stopped working]

26 minutes ago, macca4848 said:

All sorted now with engineer code thanks al

 

Now got thr new wireless device with new battery giving me a “low battery” notification. Even though showing 2.8v on the panel??…anyone had this 

Are you using eBay sorced stuff or direct from orisec 

[Tsi broke again]

35 minutes ago, james.wilson said:

It's about 1200 a year if you want to send it this way out of your profits please do. I asked Elon but he went for the bigger platform

I made a total profit of £145 this year