9651
-
Posts
2,480 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by 9651
-
bit like one of these?
-
How strange this was bumped I've had another request for some coverts today I'm going to spec ahd for the rest and maybe just use some analogue coverts. The genie machine we use is hybrid so will take ahd analogue and 1 IP It's not ideal but I can't find any HD coverts cams (
-
Lid tamper...... Front/back or both
-
Yup I fitted one in a pub! In Rhyl lol! What about an accenta ID?! I fitted two, one is still going. Take 8 zones in iD wiring config, but only use biscuits 1-8
-
You could run anything through an optima, all sorts of bells hanging off them. I cut my teeth on optima/Accentas
-
The ultimate could do anything, and could run two lines of iD. The only issue for me was the flakey build quality of the pcb itself. All of our Ultimates have long gone, but as mentioned above still have many K+ nocking about. Any that die or need upgrading go to Texe, either with 60iXD unit, or wireless
-
replace with 9651 ;-)
-
we used to fit all the range, logic 4 up to Ultimate. Back in the day the Karizma + was a cracking panel, and we still have lots under maint and comms. Looked after and correctly installed, they were/are very stable. Ultimate, hmmmm not as robust imo.
-
Battery Back Up - Sanity Check / Other Ideas
9651 replied to JasonOfOz's topic in CCTV & Access Control
Can't they just hook a generator up?! -
Anyone use anything that's pir/smoke looking, or one that I can butcher into a spare case? There seems to be a real lack of decent stuff about HIK do a covert, but quite pricey really, as I will need a few Anybody used one??
-
You did the polling set up all via the keypad and not via laptop I take it? It makes a note of it in the manual
-
We have a fair bit! Think of one 2500 with a good 70+ biscuits at a guess
-
not too bad then. Not something ive had to do tbh, but handy to know,
-
how messy is that though at the camera end? Ie how big is the converter?
-
not had any issues personally at that distance. Sometimes on a longer run we may supplement it with a .75 flex, but its rare
-
proper cat5e all the way.
-
CCA Basically its ****, and gives a much higher resistance than standard copper cable. Measure the resistance on the runs, you'll be surprised (maybe) We tend to fire the video down a twisted pair (browns), then power down the two others. So thats the blues twisted together, and the oranges.
-
Any modification to the supply side would/should need a minor works.
-
nope You done need to be qualified to be an electrician, just competent. Under the scope of competent, the only way to "prove" you are, would be works done follows 7671. So thats where all the paperwork comes from.
-
Receiver no or account no all removed? And you 100% should not have the powers connected together.
-
10402748 10154193783405722 4846651022473512836 N
9651 commented on mcelec's gallery image in Members Gallery
christ! Wish we had the time, that's epic! -
Switching Pir To Viper Glx Shock - Wiring Advice - Galaxy G2-20
9651 replied to Vini's topic in !!..DIY Installers..!!
Change the output of the panel to detector reset. Then connect the 0v of your viper to it. This will power cycle the unit every time you set the alarm, thus clearing the led. In the book of words -
Good stuff, did it go ok??
-
If the panel is 3 years old you might have compatibility issues, you've only been able to add a portal in the last few years
-
We've still got a load of Logic 4's and old Bentleys out there under maintenance, got a REALLY old ADE panel in our stores, boss wont let it go, cream metal cased thing with a KS, i'll have to grab a pic! First system I installed myself was probably an Optima!