Nova-Security

I thought it was a published standard, But its mentioned in a post above about self certificate this is where the whole industry falls down.

If they spent 10mins i think they could have your address quite easy.

Dualcom are a BSIA member and the BSIA have a lot to do the the standards dont they? so they could explain the standards to them. The next thing you will be telling me is grading of CCTV is coming in http://www.bsia.co.uk/Portals/4/Publications/218-CCTV-graded-requirements.pdf

wonder if the BSIA will get involved to assist on of their biggest members

depends on what panel, you can get RS485 booster if it was galaxy

if its a cavity wall fish it.

So you have been buying the **** ones that fall to bits after 2months

not sure now, get them through ADI

never had a problem with these http://www.coax-connectors.com/products/connectors/bnc/75ohm-plugs/coax-pack-ct100-coax-pack-bnc-crimp-crimp-plug-ct100.aspx

You will need to programme the outputs up first, Abacus have a strange thing when effected by power or crashed that the outputs all become 00 and this shows all sorts of strange faults including 6B split

Isn't that 'Self Declared' bit the whole industry in general.

What is the question? These ? http://www.air802.com/RJ45-Modular-Plug-to-Screw-Terminal-Wire-Adapter-for-PoE-Voltage-Extraction.html

Seen one of ours on a list that a certain distributor / manufatory gives photocopies out to people, funny really as its a code we use for a subbie to put in to set a system up, then when we go to commission the site its changed. Not used that subbie since and will never use again as the trust has gone. And we know who it was as every subbie has there own code issued. Agree with that,

And then you data line out is taken from the ethernet module ? Must be, as it doesnt work on remote buildings unless common the negs, may be as they are not on the same supply.

It is on Galaxys

how long are your rs485 runs ?

Have you put the end of line resistor in the furthest point?

we use mobotix, just reading your statement Cheap what are you comparing them with?

Galaxy RSS has a place on comms server where you put your UDL code

We went to take over a large site with a G3 on it, had engineers code changed by losing company connected up the laptop, and it wouldn't connect. in the g3 panel there is no pace to program the downloader ID or system ID so unless you know them you are not connecting to the panel unless you crash it and reprogram it. When we install a new system them site is then sent to our server which generates a system ID and puts our downloader ID in to the panel, then if we take a laptop to that site the only way to connect to it is to export the file from our server and import it on our laptop. Might of missed something but where on a G3 can you programe the downloader ID ?

Password, system ID and site ID required in filled in, if its a new site UDL password will do for G2 but once a G3 connects the software gives it a system ID If you do a automated call via RSS it creates a virgin site and gives the panel a system ID which the only way to get round is to crash the panel, unless you have the system ID

We have full undongled version on server. if you go to site and use laptop that has a version installed and try to connect to a panel that has already been connected to by RSS it wont let you even if the UDL password in the comms is the same. Any sites that have been connected to via RSS on server we have to export site from server and import on laptop for it to connect, so there must be something going on. Only have issues with G3 panels

I was under the impression it was still licensed, we still have to fill in a form the get updates http://www.security.honeywell.com/uk/products/intruder/control-panels/accessories/programming/466168.html Part Number Description R056-CD-L Galaxy Remote Servicing Suite kit with license R057-CD-DG Galaxy Remote Servicing Suite (Network enabled) with one Dongle R058-CD-DG Galaxy User Management Suite, with one Dongle YY0-0010 Additional 1-user dongle for R057 and R058 Doesnt the software generate a password for virgin sites which is unique to your license number ? And its not freely downloadable.

we had that with Knights moved to CQR

CQR to many problems with Knights