Jump to content
Security Installer Community

Nova-Security

Trade Full Member
  • Posts

    3,344
  • Joined

  • Last visited

  • Days Won

    24

Everything posted by Nova-Security

  1. Start by redesigning the system for the cat & dog
  2. Replaced one about 3months ago made by BSB
  3. in this game if its 8 years old its probably been super-seeded and not made anymore
  4. Sounds like a dealership / franchise, i know a few people that got their fingers burnt by a large national, as their sales reps were selling systems to people who couldn't make the repayments and the T & C s were very good to make sure they didn't lose out.
  5. Antipassback to stop cards being passed around
  6. Why run the poer to the relay at the contact and back? Run the contact wires to the panel RB007 trasistorized relay then its only doing 200m
  7. Hes using a relay to switch it, so the power must be local to the LED so volt drop doesnt matter. 12vdc 1k resistor
  8. But is the above with the 680ohm EOL resistor in place Or a 1k instead of the 680 ?
  9. DD, where did you post those quotes from, John Cassie not even seen the post.
  10. Equipment is cheaper now? Cheap tat is but if your going the proper route with adpro or equivalent then its not, redwalls have nearly double in price in the last 5 years due to bring out a new range. But the again have seen sites with cheap DVRs and cameras and site site manager checks every now and then.
  11. Seen a few guarding companies try and fail
  12. do you want to compare banned numbers list, No 1 recruitment agencies No 2 Leasing Companies No 3 Cheap TAT CCTV distributors
  13. have you made sure that the door contact or how you are monitoring the lock is showing closed (1k), DCM wont open the door if it already showing open.
  14. They went ages ago http://www.securitymagazine.com/articles/80968-stanley-works-acquires-adt-france-1 Le Stanley
  15. still going http://www.bentleysecurity.com/
  16. The was trying to do a deal with UTC last month http://www.cnbc.com/2016/02/22/honeywell-united-technologies-held-merger-talks-sources.html
  17. You can restrict fobs to set only, think that was the initial question.
  18. No its a G2-44 we have loads like this, its in the manual pages 16 & 17 (had to check) Yes it can be done, we have sites with G2-44 and set only option, may depend on the panel firmware though. Galaxy G 2 USER.pdf
  19. and 8 = MAX Function This option allows users to be assigned a MAX function. 1 = Access Only This attribute allows a user to gain door access by use of a keytag or card in front of a MAX reader. 2 = Unset Only This attribute allows a user to unset the system by use of a keytag or card in front of a MAX reader. 3 = Set and Unset This attribute allows a user to set and unset the system by use of a keytag or card in front of a MAX reader.
  20. Yes This allows the user type to be selected. There are 4 types available to choose from: 0 = Cleaner Can only set and unset the system 1 = User Can do all day-to-day operation but cannot override fault conditions 2 = Manager As per User but can override faults and reset alarms and tampers 3 = Master As per Manager but can add, remove and alter user codes.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.