Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,121

  • Joined

  • Last visited

  • Days Won

    116

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Not you arf lol I didn't really mean anything by it You need to stick the panel on a bench with sensors and play with system is probably best way
  2. al-yeti
    This all starting to look more like a sales pitch ?
  3. al-yeti
    Where does it say preAlarm? I thought prealarm was only on smokes?
  4. al-yeti
    Drill hole on side fill with expanding foam to make it quieter customer pays of course
  5. al-yeti
    First decide on panels or panel your going to use , some allow different values on each zone some are fixed values for the particular panel Then you will see what value is best On an electronics point of view, I assume lower values example 500ohms may make things difficult to detect, faults tampers etc hence why higher values are used or no resistor with seperate tamper loop Experts may correct me here
  6. al-yeti
    Honeywell still solid commercial panel, but it's falling behind for residential fast
  7. al-yeti
    What parasites?
  8. al-yeti
    Adt full steam ahead with visonic? so they will produce and adt will keep buying?
  9. al-yeti
    Thought it had three groups , two plus common But better of with g20 for more outputs
  10. al-yeti
    There are a few here, let them get out of bed in case it's a half day for them lol Nah just kidding about half day, but there's a few here or go-to http://www.thesecurityinstaller.co.uk/community/forum/268-uk-security-installers-by-regional-police-force/
  11. al-yeti
    Sounds as though either engineer reset or a service issue
  12. al-yeti
    Train you for what? PerhapS try http://www.tavcom.com/distance-learning-courses/intruder-perimeter-alarms/ And others
  13. al-yeti
    Hi Yeah it's true only knowledgeable hard-core dieharding nerdy wire men left here on tsi from what I see Still they teaching me, but I just dont get it !
  14. al-yeti
    Pir position?
  15. al-yeti
    We're you matching the intruder with fire cable from sparky ie the one above?
  16. al-yeti
    No reason why not
  17. al-yeti
    What about judging Op by his post? However premier must have a wanted feature that others don't? I don't use them so what is it?
  18. al-yeti
    Approved for what? Urn ?
  19. al-yeti
    Richochet kit or enforcer may suit you
  20. al-yeti
    So basically forget all pirs except one or two , and shocks and contacts on every opener nice job for you Plus beams
  21. al-yeti
    What price would you consider cheap?And what's your budget
  22. al-yeti
    does everyone have problems with hik vision? Is it cheap brand? Few cameras I have done have been analogue Samsung and a few honeywells both still expensive to buy What hd camera would you recommend ie 1080p or? Standard svr not nvr type
  23. al-yeti
    Sorted no problem You guys ever etch your own pcb's when making circuits or was it Vero board was it called where you cut the tracks etc Used to be all good then industry changed..... I used to buy the pellets and the pens Mark it all out drill it No time of course now
  24. al-yeti
    To sensitive man. I just Cable pulling Ya leg man!
  25. al-yeti
    What a messy job! Crimp the resistors aswell as solder, come on you alarm technicians all easy stuff circuit building? You will need quals to build that I reckon
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept