Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,443

  • Joined

  • Last visited

  • Days Won

    129

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    You said line fixed now, so set it and disconnect it and see what happens , experiment for you
  2. al-yeti
    Get the installer to change the stop set , ie stop set on line fault to disabled
  3. al-yeti
    You marked zone 1 as kitchen door and front door , perhaps that's what he meant by dropping one off that And you mentioned two keypads one in kitchen and one in porch , some keypads have a zone available onboard texecom I think so you could run off those instead of cabling back
  4. al-yeti
    Read up on eol wiring , and perhaps get a galaxy g2-20 with cp38 prox keypad, as said above cheap to buy and will give you more upgrade options if you decide you need to
  5. al-yeti
    If companies advertise they are insurance approved , it means all there installs should meet the requirements of having a certificate , urn or not, so a piece of paper to certify every install shouldn't matter I assume inspectors can select any install to check if they wanted ?
  6. al-yeti
    Can you post a picture of the thin 12core good few please with a 4 core next to it Otherwise I don't beleiev you
  7. al-yeti
    Lol Anyway urn is devalued now as police to busy or make you low priority lol And won't attend haha
  8. al-yeti
    One up is common if there's a budget in mind and would suffice
  9. al-yeti
    What panel is installed at the moment?
  10. al-yeti
    So is it still going off? And what does that mean, whats it doing exactly?
  11. al-yeti
    Does the keypad still work?
  12. al-yeti
    Taught by the best keep it coming
  13. al-yeti
    Coolio
  14. al-yeti
    Had a lecturer in college , good electronics teacher but refused to believe laser sighting existed this was in 1988
  15. al-yeti
    What a load of rubbish, question for you, are you the boffin Charlie? If not why you asking a question when you know the answer , how many times you going to change your mind or direction Blagger
  16. al-yeti
    You said your lecturer was asking, now you changed the story again.....
  17. al-yeti
    Lol
  18. al-yeti
    What you mean "irrefutable proof then."? You want a circuit diagram and explanation of how it works? Whoever asking is talking rubbish , what's irrefutable ? And about any device and what it does? Unless we say all manufacturers are basically talk rubbish? Electronic s boffin should think about it himself as he would know how and what circuits do to component level, What's his qualifications please?
  19. al-yeti
    Only if it's two way
  20. al-yeti
    Now you changed your original statment from some saying "two way..." And now your saying standard wireless
  21. al-yeti
    If it was one way, what you means , "polls the info" one way means there is no info in some cases??? Yes talking about two way panels, one way panels don't do this
  22. al-yeti
    Ok bref meant "in most TWO way panels..."
  23. al-yeti
    Don't you meant detector opens relay and lights led in panel , Question was prove its 2way, one way panel led lights in walk test , so I dint get it You lot to old for this lol
  24. al-yeti
    For diy it does a job, not sure if I would have it to show all events though as the call cost will be big!
  25. al-yeti
    I don't get that? Walk test proves detector sending signal not receiving
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept