What's an ATS Path Fault on a Texecom Premier, can't seem to clear it at all!!

Any help greatly appreciated.

Ats is the equipment used to signal remotely, fault will be shown depending on how system programmed you may have done something retarded like have selected that a modem is fitted when it is not

yeah ive had that ...wired the bt line in and it went..its their way of sayin "line fault" me thinks

Alarm Transmission System Fault.

IE Phone line fault.

What  i have to do if  ATS path fault ?

ats fault is different to an atp fault

 

ats fault is bad

your system isn't signalling on either

Did you install the panel, If not speak with your alarm company.

 

Have you changed anything I.e unplugged a ethernet cable, change broadband modem, phone line fault, but with out knowing how it signals the alarm, some of this is just guess work,

On 28/04/2016 at 07:34, WDT said:

Did you install the panel, If not speak with your alarm company.

 

Have you changed anything I.e unplugged a ethernet cable, change broadband modem, phone line fault, but with out knowing how it signals the alarm, some of this is just guess work,

I got the same problem and it did happen because i changed network provider. I went from BT to Virgin and i am not sure how i can get the alarm to work now with the app and clear this "ats path fault" error.

 

Please help out.

 

Many thanks in advance

Contact your installer and have your new router set up again.

The error is a warning to say its not polling the server.