https://www.abloy.com/global/en/our-products/products/electric-locks/europrofile-range/solenoid-locks/lock-case-el560

This will also remove the PTE button and BGU. But requires drilling the door to get the cable on the hinge side, which is a bit tricky process.

Or something like this https://www.abloy.com/gb/en/products/wired-locking/eped/locking/352m-80-motor-lock

to be mounted into the door frame.

 

At work I replaced the Adams right shear lock,

 

Item came from eBay as adi what £500

26 minutes ago, MrHappy said:

At work I replaced the Adams right shear lock,

 

Item came from eBay as adi what £500

Seen some online 

 

https://www.onlinesecurityproducts.co.uk/shear-locks/cdvi-diax-cz3000-flush-mount-1500kg-self-aligning-shearlock.html

looking at purchase history-

 

https://www.ebay.co.uk/itm/363360731149?_skw=Adams+Rite+1354&itmmeta=01JS6WAVX1WTH6WYZATKQ5XTAR&hash=item5499fcc00d:g:xF4AAOSwvulgeEoc&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1ckQ16os1X414xU7swkyhcrz%2FDiEflFcYti0S7mm2SnTCK0uc%2FMj7t7LS6hVmRs5Zjn2J1pEsxUY27lby%2B8YUwuG2eqYZ6gZRLLysCXUjkJUzJgbfH4yX%2BHf1fFGehnytkoMIvwSZaMR8y3He0%2BfmyvYM2q5297H65xkRzyZZ0H%2FqdFMwlBrMxHTvNHYgaaYfGYX%2BRs5zcq3mRZaBFhL%2B2NA4yVs6Z0WEk2U%2FSRa9LSMb0AKQdFySAqGMV4IdrsQjmihTzU2Mi%2BpKjPr3yoA%2BRSv8zGBGlRxulJspGWWRELqA%3D%3D|tkp%3ABk9SR-i-q9zJZQ

 

adi want £630+vat

 

I reckon all the magnetic locks come from the same chinses factory's-

 

An RGL MSL-2600 is best I can do outside of fleabay is £91.12+vat 

 

11 hours ago, al-yeti said:

 

 

 

Any examples of shears on how your fitting them ? 

 

Word of warning with shear locks alignment is critical any play on the door forget it, use lock tight on the screws unless you want to keep going back and adjusting it, lastly pay close attention to the instructions, they come with different springs for a reason.

 

Surface mounted shearlocks need the right springs, (see above) but generally wont need high level carpentry skills, mortice is a different story altogether. 

 

Personally Id sub fitting a mortice shearlock to a locksmith they will do a neater job of fitting it and getting it spot on, just put the wires in the holes is my advice especially as you have never done one before.

https://www.aldridgesecurity.co.uk/adams-0003-adams-rite-1354-0100-mortice-shear-magnet.html

Thats where our locksmith gets his

2 hours ago, PeterJames said:

Word of warning with shear locks alignment is critical any play on the door forget it, use lock tight on the screws unless you want to keep going back and adjusting it, lastly pay close attention to the instructions, they come with different springs for a reason.

 

Surface mounted shearlocks need the right springs, (see above) but generally wont need high level carpentry skills, mortice is a different story altogether. 

 

Personally Id sub fitting a mortice shearlock to a locksmith they will do a neater job of fitting it and getting it spot on, just put the wires in the holes is my advice especially as you have never done one before.

https://www.aldridgesecurity.co.uk/adams-0003-adams-rite-1354-0100-mortice-shear-magnet.html

Thats where our locksmith gets his

You know approx cost ? I give it passing see what he says 

 

I know the onsite maintenance so pricing isn't a problem 

 

But yeah I understand the alignment bit 

 

 

Powered lock looks good tho , just surface mount the cables lol

4 hours ago, al-yeti said:

You know approx cost ? I give it passing see what he says 

 

I know the onsite maintenance so pricing isn't a problem 

 

But yeah I understand the alignment bit 

 

 

Powered lock looks good tho , just surface mount the cables lol

3 hours ago, PeterJames said:

I see good makes more shekels