dra6ko Posted February 25, 2019 Share Posted February 25, 2019 I read that the unused zones must me linked,so I did this too.Now all zones are with switched off leds and only the real zones switch on when sense movement. white+black wires=normal work=switched off led. Quote Link to comment Share on other sites More sharing options...
dra6ko Posted February 25, 2019 Share Posted February 25, 2019 Found the original manual in one bag in my home with the left sensors and other parts from the set. If anyone need it I can make some scans. Now I will try to set it up,if I have any questions I will put them in new separate thread. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 25, 2019 Share Posted February 25, 2019 13 minutes ago, dra6ko said: Found the original manual in one bag in my home with the left sensors and other parts from the set. If anyone need it I can make some scans. Now I will try to set it up,if I have any questions I will put them in new separate thread. Your a proper classic man But well done for keep going and trying we wouldn't lol Quote Link to comment Share on other sites More sharing options...
dra6ko Posted February 25, 2019 Share Posted February 25, 2019 (edited) I hope now to have more luck when I have the manual. Of course If I need your help will write again. It's shame to left it like this,because everything was mounted before years ago and just needed to be configure,but I left it like this with the idea "some day". So this day come. Edited February 25, 2019 by dra6ko Quote Link to comment Share on other sites More sharing options...
dra6ko Posted February 25, 2019 Share Posted February 25, 2019 Everything set up and work fine. But the manual helped a lot.There was not a chance to make something without it. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 25, 2019 Share Posted February 25, 2019 1 hour ago, dra6ko said: Everything set up and work fine. But the manual helped a lot.There was not a chance to make something without it. Shame that would have made a good sacrifice if we burned the panel on a stake Just kidding yeah..... Quote Link to comment Share on other sites More sharing options...
AMB Posted June 22, 2019 Share Posted June 22, 2019 My system appears to function fully but once the alarm goes off keying in the code will not stop the siren ? Ive tried changing the back up batteries that has no effect Any ideas please Quote Link to comment Share on other sites More sharing options...
AMB Posted June 22, 2019 Share Posted June 22, 2019 Sorry didn't mention my system is a Pre Wired Security Master Quote Link to comment Share on other sites More sharing options...
PeterJames Posted June 22, 2019 Share Posted June 22, 2019 It could be a number of things could be poor connections in the bell so t6he bell is not getting enough current, do you see corrosion on the terminals at the bell? It could be the bell is knackered, it could be the panel is knackered my money is on one of the first two Quote Link to comment Share on other sites More sharing options...
al-yeti Posted June 22, 2019 Share Posted June 22, 2019 5 hours ago, AMB said: Sorry didn't mention my system is a Pre Wired Security Master Reality get some money together and scrap it , seriously Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.