Hi am trying to get a deltabell working with my new risco lightsys plus panel I have set the bell to neg trigger and the strobe to neg trigger and connection to panel OU1 NO=Bell and 0U2 trigger but when the alarm is activated  I don't get any sound or Strobe from the deltabell can any 1 help pls here's a pic from the bell wiring

is the tamper switch unplugged ?

Hi yes on the bell the plug is not connected 

For the cover so the bell does not ring when you open it

Is that why the bell does not ring when alarm is activated

 

Kind regards

Naeem

You need to have the switch closed for the bell to operate correctly. (or link it with a jumper on the pcb) 

 

 

Hi thanks for getting back to me where do I place the jumper on the bell PCB please as I can't see a option to disable the tamper

 

Kind regards

Naeem

Just now, Naeem ahmed said:

Hi thanks for getting back to me where do I place the jumper on the bell PCB please as I can't see a option to disable the tamper

 

Kind regards

Naeem

 

That NO isn't a relay is it on the panel? 

Hi thanks for getting back yes it's on the panel

1 hour ago, Naeem ahmed said:

Hi thanks for getting back yes it's on the panel

James is pointing out that your connecting to a relay which unless wired correctly will do nothing 

 

Assuming the relay is triggered on alarm the no can stay in the bell trigger , but the c (common needs to connect to negative or minus or -ve ) that way when the alarm triggers it will connect the bell trigger to the negative it requires to ring it

 

 

 

 

Strobe I am not sure , the other outputs are programmable perhaps and you need to look at menus what they can do

Actually opto relays , I couldn't be bothered to see what and how they work in the panel other than that optical relays work similar