I guess i could use door entry fob to set and unset system

 

something like this

 

https://www.doorentryonline.co.uk/acatalog/SR2-Proximity-card-key-fob-reader.html

Edited November 17, 20205 yr by btssn
add info

1 hour ago, btssn said:

I don't think client wants to spend more than £50 - £80 current simple set reader has failed is reason for upgrade 

Including labour?

Just now, al-yeti said:

Including labour?

  I shall hope not ?

1 minute ago, btssn said:

  I shall hope not ?

What about a max 4 set in standalone mode maybe you can use it to set u set , the Honeywell uses a set key switch input ? I can't remember really 

 

But you would need the prox tags aswell so £50 no good 

 

But what Pete said should work , although a stand alone hkc keypad would do it to if your in the trade 

hmm the galaxy max 4 is more expensive, client is bit cheap skate lolz, i will check manual i believe it uses key switch input so the ss2 could be used to set and unset, i do not need fancy lights as will be fitting next to keypad so just simple set and unset.

I think you will struggle, the gen 4 prox option was popular, while fobs can be sorted hardware can't. I'd suggest a panel change

8 hours ago, james.wilson said:

I think you will struggle, the gen 4 prox option was popular, while fobs can be sorted hardware can't. I'd suggest a panel change

 

Already suggested however customer does not want to spend that kind of money may just leave them with keypad until they get fed up.

10 hours ago, al-yeti said:

But what Pete said should work , although a stand alone hkc keypad would do it to if your in the trade 

 

Do you mean this keypad would keypad function ? most likely not however could be wired to use rf to set and unset

 

https://www.hkcsecurity.com/en-GB/products/intrusion-keypads/rf-rkp---rf-remote-keypad-/

would the galaxy mk7 keypad work with this panel as they have built in prox fob