Timmymeads Posted March 10, 2020 Author Share Posted March 10, 2020 Shall I take our 5.6.7 zones only and join them together and cap them only. Then try alarm ? Quote Link to comment Share on other sites More sharing options...
PeterJames Posted March 10, 2020 Share Posted March 10, 2020 5 minutes ago, Timmymeads said: Shall I take our 5.6.7 zones only and join them together and cap them only. Then try alarm ? Put links in theplace of the wires you took out Quote Link to comment Share on other sites More sharing options...
Timmymeads Posted March 10, 2020 Author Share Posted March 10, 2020 Ah I see just 2 wires between 3 zones - then the wires I took out originally just cut them back and insulation tape? Quote Link to comment Share on other sites More sharing options...
PeterJames Posted March 10, 2020 Share Posted March 10, 2020 Remove circuit wires, dont worry about taping them they are not live, put links in each circuit. If you are not sure what you are doing then get someone who is to do it Quote Link to comment Share on other sites More sharing options...
Timmymeads Posted March 13, 2020 Author Share Posted March 13, 2020 Thanks for your help Peter - I’ve done it and it all works like it should! nice one mate Quote Link to comment Share on other sites More sharing options...
PeterJames Posted March 13, 2020 Share Posted March 13, 2020 Hi Timmy puting the links in only proves the fault is not the panel, you havent fixed the fault at all, the detectors will not trigger the alarm if you have removed them Quote Link to comment Share on other sites More sharing options...
norman Posted March 13, 2020 Share Posted March 13, 2020 If in doubt.... Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
Timmymeads Posted March 14, 2020 Author Share Posted March 14, 2020 Hi Peter, There was no wires originally in 5.6.7 so I linked them in. When I do a easy set it gives me a different sound like the one when I omitted the zones manually. It does 10 second count down and then it sets. I stayed in the house and walked to a detector and the main alarm sounded so think all should be fine. I’ll try the other detectors too 1 Quote Link to comment Share on other sites More sharing options...
PeterJames Posted March 14, 2020 Share Posted March 14, 2020 5 hours ago, Timmymeads said: Hi Peter, There was no wires originally in 5.6.7 so I linked them in. When I do a easy set it gives me a different sound like the one when I omitted the zones manually. It does 10 second count down and then it sets. I stayed in the house and walked to a detector and the main alarm sounded so think all should be fine. I’ll try the other detectors too That makes more sense t sounds like they were originally switched off in the programing and some how you switched them on, linking them out is as good as deprogramming them Quote Link to comment Share on other sites More sharing options...
Timmymeads Posted March 29, 2020 Author Share Posted March 29, 2020 Peter - How do I enable night set - I’ve tried #+3 and get 3 beeps - Pretty sure one programmer it aswell and nothing? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.