Timmymeads

Okay I put in code and then present night set and it has a delayed silent alarm so I think I need to program in the sound?

Peter - How do I enable night set - I’ve tried #+3 and get 3 beeps - Pretty sure one programmer it aswell and nothing?

Hi Peter, There was no wires originally in 5.6.7 so I linked them in. When I do a easy set it gives me a different sound like the one when I omitted the zones manually. It does 10 second count down and then it sets. I stayed in the house and walked to a detector and the main alarm sounded so think all should be fine. I’ll try the other detectors too

Thanks for your help Peter - I’ve done it and it all works like it should! nice one mate

Ah I see just 2 wires between 3 zones - then the wires I took out originally just cut them back and insulation tape?

Shall I take our 5.6.7 zones only and join them together and cap them only. Then try alarm ?

If I link out 5.6.7 zones then if I use easy set will it arm?

Yes I can link out and no how to do it just need to figure which wire is for which.l, I don’t have a multi meter but there might be instructions. I was more if I could do it through the panel system

I have the programming code - How do it do it?

I have to omit the zones each time to set the alarm by User code + 6 then press 5,6,7 * then press easy set #+1 then this set the alarm. It will set alarm off if the PIR is obstructed. But once I do this or open door and enter the code. I have to manually do this process again! Any support would be appreciative.

Must be a logical explanation

It’s works fine for me - Why pay out when I have a functional alarm just with a few teething issues - Can anyone figure out? I must have done a master reset somehow although I didn’t ommit 5,6,7

yes tried opening and shutting the door and also tried making it so the exit beep is 10 seconds and nothing changes?! So frustrating

Hi Logan, swwo I know engineer code and a user code when I put both codes in the alarm sets, PIR 5/6/7 are all red lit and day button is flashing green and power green. But it just continues to beep and not set? any ideas? 60415630111__75584551-E5B4-4D01-A726-9B8D01A418B8.MOV

I don’t think people really can be bothered with what you have stated. Instead you have just wanted to be differcult... and proven unhelpful - Take your power elsewhere Logan - and remember with great ‘power, comes..... not!