Jump to content
Security Installer Community

Recommended Posts

Hey guys 

im new here and hoping for a little advice and help, I have a risco agility 3 in my house, all working fine until today. I’ve gone to set it on my way out and it won’t accept my code and spoke to me in German 

 

then it wouldn’t accept the engineer code and locked the keypad. I can’t do ANYTHING the codes don’t work even the default codes or the fobs don’t work ? Any ideas guys, I’m away travelling in 2 weeks and can’t be alarmless

Nine nine nine code didn’t work either lol

 

the backup battery was changed recently as were all the other batteries in keypad, pirs, sensors and bell box. Also just noted that the text on the keypad has reset for the original installer to “security system” 

 

power cut ? I did turn the mains off  during the process ?

1 minute ago, Lee Bartholomew said:

the backup battery was changed recently as were all the other batteries in keypad, pirs, sensors and bell box.

 

DIY job rather than the original installer I guess?

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

26 minutes ago, datadiffusion said:

 

DIY job rather than the original installer I guess?

the system was installed by an approved Risco installer, the batteries were replaced by myself 

 

there won’t be anyone here to feed the dog

 

what is the procedure for full default ? 

1 hour ago, Lee Bartholomew said:

the system was installed by an approved Risco installer, the batteries were replaced by myself 

 

there won’t be anyone here to feed the dog

 

what is the procedure for full default ? 

You can't be alarmless , then get new alarm , defaulting won't help , as why would you risc it? While your away it starts talking in French to buy a dog

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.