Hi

 

I currently have a Texecom Premier 48 which I connected a Menvier SD-GSM to approx 12 months ago, I connected this to the outputs so that I could tell which zone had activated - took quite a bit of fiddling with but I got there in the end and all worked well.

I also set one of the outputs so that I received a text when the house was in "entry". I noticed that randomly (every couple of months) the texts stopped sending and would only work again after I powered the SD-GSM off and on again - not ideal!

This happened again recently and after I restarted the SD-GSM again it wouldn't work any more  the LCD display has bits of character missing and the mobile numbers have strange characters in them so I guess its for the bin.

My question is which GSM dialler would anyone recommend? I dont want to spend a fortune really. The ones I have in mind are the GJD710 and I have also seen at a local supplier a TELL Pager4 Pro 3G.IN6.R1 

It needs to be GSM as I don't have a landline

Any advice would be appreciated 

Many Thanks

How many inputs you need?

It would be good to have 8 but it doesn't look like there is much out there except the Menvier ones so I suppose 3 would do. 1 for alarm, 1 entry and 1 exit!

Pyronix V2 GSM

Pretty sure I have one I'd sell if you're interested.

 

Grant

 

1 hour ago, fresh57 said:

It would be good to have 8 but it doesn't look like there is much out there except the Menvier ones so I suppose 3 would do. 1 for alarm, 1 entry and 1 exit!

Go to advent controls online they have one that will do for you 

 

Forget the V2 Tel , it's far to complicated for what you want to do and will make your life difficult

Why not one of the Texecom modules designed for the Premier?

10 minutes ago, sixwheeledbeast said:

Why not one of the Texecom modules designed for the Premier?

Does it work on all versions?

26 minutes ago, sixwheeledbeast said:

Why not one of the Texecom modules designed for the Premier?

I looked at those but they look a bit confusing, looks like it would be ok if I had the Premier Elite but unfortunately I havent!

Yep they where available Pre-Elite, just uses a COM Port and programs off the keypad.

1 minute ago, sixwheeledbeast said:

Yep they where available Pre-Elite, just uses a COM Port and programs off the keypad.

What was the module called? Sounds like what I'm after

Thanks