d-tec services Posted October 21, 2019 Share Posted October 21, 2019 Hi..just wondering if anyone can recommend a decent app for monitoring a Galaxy panel? Cheers Quote Link to comment Share on other sites More sharing options...
Nova-Security Posted October 21, 2019 Share Posted October 21, 2019 Honeywell GX app or https://www.selfmon.co.uk/SelfMon/cpanel/ Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
PeterJames Posted October 21, 2019 Share Posted October 21, 2019 It doesnt quite work that way, there is an app for galaxy its called GX I believe but it will only work with later panels. You can use an aftermarket app but you need the associated Coms Webway has an app that will work with most panels but you are limited to what you can do Quote Link to comment Share on other sites More sharing options...
GalaxyGuy Posted October 22, 2019 Share Posted October 22, 2019 If you have a Dimension or Flex panel with Ethernet module, you can use Honeywell GX app or SelfMon Virtualkeypad app to remote control your panel. If you have a G3 or classic panel, only the Selfmon app will work. If you have a G2 panel, then only the Selfmon app will work, but it needs an LCE-01 Ethernet module fitted. The Selfmon app also works with webway module and any other module that has passthrough, giving full remote keypad control too. Monitoring via push notifications is free. Selfmon has a minimal account charge and multiple options for path checking and message notification types. 1 Quote Link to comment Share on other sites More sharing options...
jitesh Posted November 19, 2019 Share Posted November 19, 2019 Hi galaxy guy, ive recently purchased galaxy 48 panel and it came with webway ethernet board with sim slot. how do I set this up on the panel menu and which is the best app to self monitor this with. Will appreciate very much for your help. Quote Link to comment Share on other sites More sharing options...
GalaxyGuy Posted November 19, 2019 Share Posted November 19, 2019 To use a webway, you'll need an installer. For diy, you're probably better getting an e080-8 Ethernet module. Quote Link to comment Share on other sites More sharing options...
jitesh Posted November 20, 2019 Share Posted November 20, 2019 Thanks galaxy guy. Its all installed, but can the ethernet part be used for self monitoring with a GX app? Am not concerned about using the gsm facility on it at the.moment. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted November 20, 2019 Share Posted November 20, 2019 1 hour ago, jitesh said: Thanks galaxy guy. Its all installed, but can the ethernet part be used for self monitoring with a GX app? Am not concerned about using the gsm facility on it at the.moment. No you can't use the webway module Buy the ethernet card e080 and then use gx app (Honeywell app is rubbish by the way Selfmon tho and virtual keypad works well On 21/10/2019 at 16:51, Nova-Security said: Honeywell GX app or https://www.selfmon.co.uk/SelfMon/cpanel/ As said here Quote Link to comment Share on other sites More sharing options...
id90288 Posted February 15, 2020 Share Posted February 15, 2020 Can the Flex V3 with the ethernet module be setup for self mon or gx app without needing the RSS software? I read somewhere the RSS is need to set the UMS password etc? Thanks Ian Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 15, 2020 Share Posted February 15, 2020 1 hour ago, id90288 said: Can the Flex V3 with the ethernet module be setup for self mon or gx app without needing the RSS software? I read somewhere the RSS is need to set the UMS password etc? Thanks Ian You can everything without rss Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.