Skip to content
View in the app

A better way to browse. Learn more.

Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Abacus expander

Featured Replies

https://www.ebay.co.uk/itm/ABACUS-REM-UNIT-BRAND-NEW/193054640248?hash=item2cf2f40878:g:2MQAAOSwPUVdWTbJ

 

abacus.thumb.jpg.235d371d58f35b1414a4cbbff4c4807b.jpg

 

So are these actually 'digital' or just a very elaborate setup of resistor values?

 

As I notice it connects to a zone, not a databus according to the instructions??

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

I'd assume data. The hkc connects some addressable devices via zone inputs 

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

w/o digging a book out....

 

IIRC the rkp & expander where on the same data bus & need a 5th wire for rkp sounds ?

 

Abacus used to use funny resistor values & could have spilt zones (a&b) via resistor vaules or "peardrops"

 

There was an 6/14 with a knacked rkp + expander kicking around my unit floor the other month

Mr th2.jpg Veritas God

  • Author

Instructions are very odd though, which is why I wondered;

 

Connect to Zone 8 'A' terminal for a 16, or any Zone 'A' terminal for a 64, the A+B zone splitter thing I do remember although now don't even have any of these on the books and never any with zems or splits. So presumably replaces the zone in each case?

 

Wasn't the zone splitting sort of 'secret', in that they wouldn't tell you the resistor values but rather tryed to either sell you a box or their own brand PIR which had the 2nd alarm terminals built in?

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

16 minutes ago, MrHappy said:

w/o digging a book out....

 

IIRC the rkp & expander where on the same data bus & need a 5th wire for rkp sounds ?

 

Abacus used to use funny resistor values & could have spilt zones (a&b) via resistor vaules or "peardrops"

 

There was an 6/14 with a knacked rkp + expander kicking around my unit floor the other month

Splitting was weird lol

But a zone leg was needed

 

Secret? Everything was in box lol

  • Author

Odd, data via the Zone then! And also 'clean' power on B and C, and presumably dirty power for the detectors!

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

56 minutes ago, MrHappy said:

Al's tight you loose z8 on board....

IMG_20190822_125902272.thumb.jpg.e21a17d40f4b78261a584950344d3bf1.jpg

I not tight 

 

I send you da keypad if you need one?

48 minutes ago, datadiffusion said:

Odd, data via the Zone then! And also 'clean' power on B and C, and presumably dirty power for the detectors!

You dirty one around here man

  • Author

Careful, I might have to channel the Voice of AG...

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

By using this site, you agree to our Terms of Use.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.