27 minutes ago, james.wilson said:

Because if comms are enabled for part set may as well use the bell output

I don't get you 

 

What's bell ouput got to do with Comms in this scenario? Comms won't wake neighbours  lol 

13 hours ago, james.wilson said:

Could you use an intruder output with a 15 min confirm timer and then disable comms in part set. Afraid I don't know the panel at all

 

5 minutes ago, james.wilson said:

 

Still don't get why you need to disa le Comms , never mind lol

You'd be using the comms output instead of the bell trig.

I still believe Part Set Bell Delay or a Custom Output are the best two options.

3 hours ago, sixwheeledbeast said:

You'd be using the comms output instead of the bell trig.

I still believe Part Set Bell Delay or a Custom Output are the best two options.

Ohhhhhhhhhhh I get it now , vote SWB ,not Boris

 

Yes latter of your point seems sensible

 

Hi All 

 

Just an update to my earlier post Texecom gave me the solution to my question how to silence the external sounders at night during part set  and this was the solution below, maybe of help for people like myself retired electrician DIYer thanks again to those who replied.

 

Enter engineer code
Press 2 (Area Programming)
Press Yes/Tick
Press Yes/Tick (Timers)
Press Yes/Tick 7 times
Press No/X, 999 then Yes/Tick

 

Regards

 

Bill

Thanks for the follow up

You have set the Part Set Bell delay to 16 minutes like above.

Hi there, I’m sorry I’m not getting it, if you set the timer delay to 999 how does that equate to 16mins ?

It's all easy if you know.

999 seconds =~ 16 minutes