This is the piezo that delivers the siren tone, driven from the pcb, have the cables and piezo been ripped out in an attempt to silence the unit??

I've replaced siren / sounder as stated in first post.  Good heads up though.

 

Would this wiring combination work?

Bell box 
V+ red 
V - blue 
Sw black 
St green
R yellow

 

 

 

Edited January 18, 20197 yr by Carlos12

Yes buddy that should be the ticket, bell tamper should clear when you close the bell lid, just make sure you addjust the tamper switch to make it close as you fit the lid.

 

Thanks so much everyone!!

Handy little image for you there matey

Edited January 18, 20197 yr by Mad Man Dyson

Wired in phone cable not great...

Not only the Piezo wires but Test jumper on and battery jumper off also.

Many thanks!

2 minutes ago, sixwheeledbeast said:

Wired in phone cable not great...

Not only the Piezo wires but Test jumper on and battery jumper off also.

Picture Is not mine haha, I would not embarass myself, picture stolen from google!

Wired this up, getting a fault on Zone 08?

https://imgur.com/a/1ck4y5d

 

Scroll down for bellbox wiring.

 

Really stumped what the issue is? Any help is really appreciated, thanks.

Edited January 19, 20197 yr by Carlos12

Whats on Zone 8? It's likely unrelated to the bellbox being a Zone