Eavesy Posted February 1, 2018 Share Posted February 1, 2018 So complete DIYER here needing some advice on a Veritas 8 system. Houshold alarm has two bell boxes one at front and one at rear of property. Wiring comes from panel in garage to bell box at the front and then goes from here through the loft to bell box at the rear. When alarm is set off front bell box does not alarm or strobe but bellbox at the rear does both. One thing to to note is only one green led is flashing in the box which I believe is a battery charging issue. anyone got any ideas with this initial information. checked all wiring connections in front box seem fine and must be as rear box is fine. Also checked battery in box by killing mains. And removing battery lead in panel again only back box sounds. thanks Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/ Share on other sites More sharing options...
james.wilson Posted February 1, 2018 Share Posted February 1, 2018 Veritas is ur panel what are the bells? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473875 Share on other sites More sharing options...
Eavesy Posted February 1, 2018 Author Share Posted February 1, 2018 Sorry it’s a Texecom oddessy 1 bellbox and Texecom alarm box Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473877 Share on other sites More sharing options...
james.wilson Posted February 1, 2018 Share Posted February 1, 2018 Dont know the gear but id check the tampers on the non functioning bell securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473880 Share on other sites More sharing options...
Eavesy Posted February 1, 2018 Author Share Posted February 1, 2018 Take it your referring to the microswitch at the side which depresses when the box cover is replaced...? would the battery being dead make a difference to the bell working or not ?? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473882 Share on other sites More sharing options...
Eavesy Posted February 1, 2018 Author Share Posted February 1, 2018 This is the wiring arrangement as installed by alarm engineer when first fitted Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473883 Share on other sites More sharing options...
james.wilson Posted February 1, 2018 Share Posted February 1, 2018 why the block term? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473888 Share on other sites More sharing options...
Eavesy Posted February 1, 2018 Author Share Posted February 1, 2018 No idea, like I said I this is the first time the cover has been off the bell box since installation.....??? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473893 Share on other sites More sharing options...
al-yeti Posted February 1, 2018 Share Posted February 1, 2018 1 hour ago, james.wilson said: why the block term? Maybe there way of doing the tampers ? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473897 Share on other sites More sharing options...
sixwheeledbeast Posted February 1, 2018 Share Posted February 1, 2018 Not sure why there is two whites in the terminal block, you need to take one MSW wire to the second box. I hope the other bell isn't SAB as you would likely blow the panel. One flashing comfort light means it's in hold-off mode with the tamper open. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41905-veritas-8-bell-box-issue/#findComment-473900 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now