Hi all,

 

I'm having trouble part setting my Pyronix Enforcer panel from the user code.

 

When setting the alarm with the user code, it allows me to set Zone A only. It won't let me set Zone B.

 

If I set from the engineer menu, I can select either Zone A or B.

 

I have flexi set enabled for the user.

 

Anybody know where I'm going wrong?

 

Thanks in advance.

Not sure , but do you have to enable zones to part set , so if the attributes are not set then there's nothing to set 

 

From engineering is that some kind of forced set 

 

Just keeping you occupied until an expert arrives 

As above.

 

Lovely weather?

Edited August 17, 20178 yr by datadiffusion

Do you mean areas A, B, C or D and your user code only allows you to set A?

If so you need to enable set/unset area B for that user code.

13 minutes ago, Simlec said:

Do you mean areas A, B, C or D and your user code only allows you to set A?

If so you need to enable set/unset area B for that user code.

Excellent Mr Barnes

29 minutes ago, Simlec said:

Do you mean areas A, B, C or D and your user code only allows you to set A?

If so you need to enable set/unset area B for that user code.

 

I did wonder this, but is this an option on the enforcer? If so, how? I can't see anything in the manual, and when I went into 'Codes and Users' in the engineer menu, I saw no option for doing this.

 

I'm wondering if I'm trying to do the wrong thing? I've set a 'part set' as Zone B and then when I want to only 'part set' (i.e at night), I want to be able to select Zone B when I put my user code in. Is this right?

What version panel have you got?

Enter master user menus (press D then enter your master user code)

You can then change user areas under change codes menu

Edited August 17, 20178 yr by Simlec

12 hours ago, Simlec said:

Enter master user menus (press D then enter your master user code)

You can then change user areas under change codes menu

Hi,

 

Thanks for your reply.

 

I tried this but nothing happened. The 'A' button remained illuminated and it wouldn't allow me to select 'B'.

 

It's version 10.

 

Thanks in advance.

 

Have you enabled the keypad for area B?