hi all

 

moved into a property recently but the alarm boxes outside kept going off when there was a power cut/ did electrical work on the upstairs ring and the full alarm goes off when power comes back on.

 

I read that this is due to a dud battery but on opening the alarm i found the battery was not connected, neither was the tamper switch. there are two very thin wires connected to the + which do not appear to be secured properly top anything and io do not have an engineer code.

 

I can't see any labels on the board that specify what the make of the al[arm is and was hoping someone might recognise it. there is a date reference to Sept 2000 on it though. 

 

Many thanks

 

mdavies

pic of the keypad too?

but its 17 yrs old

ADE something in metal box....

edit-

 

Accenta ABI ?

Here is the keypad.  

 

I realise it is not exactly cutting edge, but I figured lots of people have old alarms and someone might have serviced one or two similar alarms before. Bit of a longshot i know.....

It may be a accenta mercury... I found this post where the board looks remarkably similar..

 

 

Next job is to sort out wiring then figure out how to clear tamper warning....,.

Ademco something

That's an ABI,  Logo on left pcb corner

Edited March 29, 20179 yr by PSE

its an ade or mdt not sure mind. Ive never seen that board 

 

No doubt Mr Happy will be along soon to remind us that it used the same metal case as the Karizma.

 

Probably a piece of sh#t if I'm honest, going on my vast experience. Possibly replace with Euro Mini.

Edited March 29, 20179 yr by datadiffusion
Who controls the past controls the future. Who controls the present controls the past.