al-yeti Posted January 21, 2014 Share Posted January 21, 2014 Fitting a Rapier has an engineer input where is the setting for that in the GD48 for when in engneers mode it sets the output, or is automatic like other panels that when you enter engineer mode it will hold off the tsmper / bell if i open it up Link to comment Share on other sites More sharing options...
james.wilson Posted January 21, 2014 Share Posted January 21, 2014 No its a seperate output securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
al-yeti Posted January 22, 2014 Author Share Posted January 22, 2014 ok i must be losing the plot (lost it already really) where is it? Link to comment Share on other sites More sharing options...
matthew.brough Posted January 22, 2014 Share Posted January 22, 2014 ok i must be losing the plot (lost it already really) where is it? Cleverly disguised in the display log menu www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
matthew.brough Posted January 22, 2014 Share Posted January 22, 2014 Try menu 53 outputs > engineer www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
al-yeti Posted January 22, 2014 Author Share Posted January 22, 2014 Doh! ------>(thats your who you are! and i am who i am!) thanks! Link to comment Share on other sites More sharing options...
olijones11 Posted January 27, 2014 Share Posted January 27, 2014 you do have to watch this if your wanting to do bell tests in engineer mode as the siren and strobe wont activate when the siren is in engineer mode Link to comment Share on other sites More sharing options...
matthew.brough Posted January 27, 2014 Share Posted January 27, 2014 you do have to watch this if your wanting to do bell tests in engineer mode as the siren and strobe wont activate when the siren is in engineer mode Why? www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
olijones11 Posted January 27, 2014 Share Posted January 27, 2014 the eng link on the rapiers holds off all bell activity when its got 12v present, so when you fire your bell output nothing happens Link to comment Share on other sites More sharing options...
matthew.brough Posted January 27, 2014 Share Posted January 27, 2014 I see the bell does the suppression not the panel. That's what I was wondering as there is no link between the panel being in engineer mode and the ability to toggle outputs. Case solved www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.